Moxa Technologies EDS-726 user manual Management Vlan ID, Port Pvid, Port Fixed Vlan List Tagged

Page 56

EDS-726 Series User’s Manual

Featured Functions

To configure EDS-726 VLANs, use the VLAN Port Setting page to configure the ports.

Port Type

Setting	Description	Factory Default
Access	This port type is used to connect single devices without
	tags.
Trunk	Select “Trunk” port type to connect another 802.1Q	Access
	VLAN aware switch or another LAN that combines
	tagged and/or untagged devices and/or other
	switches/hubs.

ATTENTION

For communication redundancy in the VLAN environment, set “Redundant Port,” “Coupling Port,” and “Coupling Control Port” as “Trunk Port,” since these ports act as the “backbone” to transmit all packets of different VLANs to different EDS-726 units.

Management VLAN ID

Setting	Description	Factory Default
VLAN ID	Set the management VLAN of this EDS-726.	1
ranges from
1 to 4094
Port PVID
Setting	Description	Factory Default
VID range from 1	Set the port default VLAN ID for untagged devices that	1
to 4094	connect to the port.
Port Fixed VLAN List (Tagged)

Setting	Description	Factory Default
VID range from 1	This field will be active only when selecting the “Trunk”	None
to 4094	port type. Set the other VLAN ID for tagged devices that
	connect to the “Trunk” port. Use commas to separate
	different VIDs.
Port Forbidden VLAN List

Setting	Description	Factory Default
VID range from 1	This field will be active only when selecting the “Trunk”	None
to 4094	port type. Set the VLAN IDs that will not be supported
	by this trunk port. Use commas to separate different
	VIDs.

3-41

Image 56

Contents Moxa EtherDevice Switch EDS-726 Series User’s Manual First Edition, JulyDisclaimer Copyright NoticeTrademarks Table of Contents Chapter EDS Configurator GUI Introduction Package Checklist FeaturesOverview Industrial Networking CapabilityUseful Utility and Remote Configuration Recommended Software and AccessoriesGetting Started RS-232 Console Configuration 115200, None, 8, 1, VT100 Connection CautionEDS-726 Series User’s Manual Key Function Configuration by Telnet Console Configuration by Web Browser EDS-726 Series User’s Manual Disabling Telnet and Browser Access Featured Functions Configuring Basic Settings System IdentificationPassword Switch NameSwitch Location Switch DescriptionPassword AccountAccessible IP Any host on a specific subnetwork can access the EDS-726Any host can access the EDS-726 Allowable Hosts Input formatEnable PortDescription NameNetwork Port Transmission SpeedFDX Flow Control Port TypeAuto IP Configuration Switch IP AddressSwitch Subnet Mask Default GatewayTime Current TimeCurrent Date System Up TimeSystem File Update-By Remote Tftp System File Update-By Local Import/Export Factory Default Using Port TrunkingSystem File Update-By CF Card Port Trunking Concept Configuring Port Trunking Setting Description Trunk Group Maximum of 4 trunk groupsTrunk Type Member Ports/Available PortsConfiguring Snmp SnmpSnmp Read/Write Settings Snmp VersionsV1, V2c Read Community V1, V2c Write/Read CommunityTrap Settings Trap Server IP/NameUsing Communication Redundancy Switch Object IDPrivate MIB information Gigabit Ethernet Redundant Ring Capability 300 msInitial Setup Turbo Ring ConceptWhen the number of EDS-726 units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept What is STP? Port Speed Path Cost 802.1D Edition 802.1w-2001 How STP WorksSTP Requirements STP Configuration STP ReconfigurationDifferences between Rstp and STP STP CalculationUsing STP on a Network with Multiple VLANs STP ExampleConfiguring STP/RSTP Forwarding Delay Root/Not RootProtocol of Redundancy Bridge priorityConfiguration Limits of RSTP/STP Enable STP per PortPort Priority Port CostUsing Traffic Prioritization What is Traffic Prioritization?Traffic Prioritization Concept How Traffic Prioritization WorksTraffic Prioritization Differentiated Services DiffServ Traffic MarkingIeee 802.1p Priority Level Ieee 802.1D Traffic Type Traffic Queues Configuring Traffic PrioritizationQoS Classification Default Port Priority Queuing MechanismInspect TOS Inspect COSTOS/DiffServ Mapping Setting Description FactoryCoS Mapping Virtual LAN Vlan Concept Using Virtual LANWhat is a VLAN? VLANs and Moxa EtherDevice Switch Benefits of VLANsManaging a Vlan Communication Between VLANsSample Applications of VLANs using Moxa EDS-726 HUBConfiguring 802.1Q Vlan Vlan Port SettingsManagement Vlan ID Port PvidPort Fixed Vlan List Tagged Port Forbidden Vlan ListUsing Multicast Filtering What is an IP Multicast?Concept of Multicast Filtering Benefits of MulticastMulticast Filtering Network without multicast filteringMulticast Filtering and Moxa EtherDevice Switch Igmp Internet Group Management Protocol Snooping ModeQuery Mode Igmp Multicast FilteringConfiguring Igmp Snooping Igmp Snooping SettingsStatic Multicast MAC Enabling Multicast FilteringIgmp Snooping Static Multicast Router PortQuerier Igmp TableAdd Static Multicast MAC Add New Static Multicast Address to the ListNone Join PortConfiguring Gmrp Port Setting Description Factory DefaultGmrp enable Setting Description Factory Default Port Mode Setting Description Factory DefaultUsing Bandwidth Management Configuring Bandwidth ManagementGmrp Table Broadcast Storm ProtectionUsing Port Access Control Traffic Rate Limiting SettingsIeee Static Port LockMessage Exchange Configuring Ieee 802.1XDatabase Option Radius ServerServer Port Shared Key802.1X Re-Authentication 802.1X Re-AuthenticationLocal User Database Setup 802.1X Table Local User Database SetupStatic Port Lock Email Alarm Events Settings Using Auto WarningConfiguring Email Warning MoxaEtherDeviceSwitch0001@SwitchLocation Event TypesSystem Event Port EventEmail Settings Configuring Relay Warning Relay Alarm Events SettingsConfiguring Relay Event Types Activate your settingsRelay Alarm List Override relay alarm settingsUsing Line-Swap-Fast-Recovery Using Set Device IPConfiguring Line-Swap Fast Recovery Enable Line-Swap-Fast-RecoveryConfiguring Set Device IP Set up the connected devicesUsing Diagnosis Mirror PortOutput data stream Bi-directionalPing Using MonitorMonitor by Switch Using the MAC Address Table Monitor by PortUsing Event Log ALLEDS Configurator GUI Starting EDS Configurator Broadcast SearchUpgrade Firmware Search by IP addressModify IP Address Export Configuration Import Configuration Unlock Server EDS-726 Series User’s Manual MIB II.1 System Group MIB II.2 Interfaces GroupMIB II.4 IP Group MIB II.5 Icmp GroupMIB II.17 dot1dBridge Group MIB II.10 Transmission GroupMIB II.11 Snmp Group Public Traps Private TrapsModular Managed Switch System, EDS-72610G InterfaceMechanical PowerGigabit Ethernet Interface Module, IM series Fast Ethernet Interface Module, IM series Optical FiberInterface Environmental Regulatory ApprovalsService Information Moxa Internet Services Following services are providedProblem Report Form Serial NumberProduct Return Procedure