Moxa Technologies EDS-726 user manual Current Time, Current Date, System Up Time, Time Zone

Page 24

EDS-726 Series User’s Manual

Featured Functions

Time

EDS-726 has a time calibration function based on information from an NTP server or user specified Time and Date information. Functions such as Auto warning “Email” can add real-time information to the message.

NOTE

EDS-726 does not have a real time clock. The user must update the Current Time and Current

 

 

Date to set the initial time for EDS-726 after each reboot, especially when the network doesn’t

 

 

have an Internet connection for NTP server or there is no NTP server on the LAN.

 

 

 

 

 

 

 

Current Time

 

 

 

 

Setting

Description

Factory Default

 

 

User adjustable time.

The time parameter allows configuration of the

00h:00m:00s

 

 

 

local time in local 24-hour format.

 

 

 

Current Date

 

 

 

 

 

 

 

 

 

Setting

Description

Factory Default

 

 

User adjustable date.

The date parameter allows configuration of the

1970/01/01

 

 

 

local date in yyyy-mm-dd format.

 

 

System Up Time

Indicates EDS-726’s up time from the last cold start. The unit is seconds.

 

Time Zone

 

 

 

 

Setting

Description

Factory Default

 

 

User selectable time zone

The time zone setting allows conversion from

GMT (Greenwich

 

 

 

GMT (Greenwich Mean Time) to local time.

Mean Time)

 

 

 

 

NOTE

Changing the time zone will automatically correct the current time. You should configure the

 

 

time zone before setting the time.

 

 

 

 

 

 

 

3-9

Image 24
Contents Moxa EtherDevice Switch EDS-726 Series User’s Manual First Edition, JulyCopyright Notice TrademarksDisclaimer Table of Contents Chapter EDS Configurator GUI Introduction Package Checklist FeaturesOverview Industrial Networking CapabilityUseful Utility and Remote Configuration Recommended Software and AccessoriesGetting Started RS-232 Console Configuration 115200, None, 8, 1, VT100 Connection CautionEDS-726 Series User’s Manual Key Function Configuration by Telnet Console Configuration by Web Browser EDS-726 Series User’s Manual Disabling Telnet and Browser Access Featured Functions Configuring Basic Settings System IdentificationPassword Switch NameSwitch Location Switch DescriptionPassword AccountAccessible IP Any host on a specific subnetwork can access the EDS-726Any host can access the EDS-726 Allowable Hosts Input formatEnable PortDescription NameNetwork Port Transmission SpeedFDX Flow Control Port TypeAuto IP Configuration Switch IP AddressSwitch Subnet Mask Default GatewayTime Current TimeCurrent Date System Up TimeSystem File Update-By Remote Tftp System File Update-By Local Import/Export Using Port Trunking System File Update-By CF CardFactory Default Port Trunking Concept Configuring Port Trunking Setting Description Trunk Group Maximum of 4 trunk groupsTrunk Type Member Ports/Available PortsConfiguring Snmp SnmpSnmp Read/Write Settings Snmp VersionsV1, V2c Read Community V1, V2c Write/Read CommunityTrap Settings Trap Server IP/NameUsing Communication Redundancy Switch Object IDPrivate MIB information Gigabit Ethernet Redundant Ring Capability 300 msInitial Setup Turbo Ring ConceptWhen the number of EDS-726 units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept What is STP? How STP Works STP RequirementsPort Speed Path Cost 802.1D Edition 802.1w-2001 STP Configuration STP ReconfigurationDifferences between Rstp and STP STP CalculationUsing STP on a Network with Multiple VLANs STP ExampleConfiguring STP/RSTP Forwarding Delay Root/Not RootProtocol of Redundancy Bridge priorityConfiguration Limits of RSTP/STP Enable STP per PortPort Priority Port CostUsing Traffic Prioritization What is Traffic Prioritization?Traffic Prioritization Concept How Traffic Prioritization WorksDifferentiated Services DiffServ Traffic Marking Ieee 802.1p Priority Level Ieee 802.1D Traffic TypeTraffic Prioritization Configuring Traffic Prioritization QoS ClassificationTraffic Queues Default Port Priority Queuing MechanismInspect TOS Inspect COSSetting Description Factory CoS MappingTOS/DiffServ Mapping Using Virtual LAN What is a VLAN?Virtual LAN Vlan Concept VLANs and Moxa EtherDevice Switch Benefits of VLANsManaging a Vlan Communication Between VLANsSample Applications of VLANs using Moxa EDS-726 HUBConfiguring 802.1Q Vlan Vlan Port SettingsManagement Vlan ID Port PvidPort Fixed Vlan List Tagged Port Forbidden Vlan ListUsing Multicast Filtering What is an IP Multicast?Concept of Multicast Filtering Benefits of MulticastMulticast Filtering Network without multicast filteringMulticast Filtering and Moxa EtherDevice Switch Igmp Internet Group Management Protocol Snooping ModeQuery Mode Igmp Multicast FilteringConfiguring Igmp Snooping Igmp Snooping SettingsStatic Multicast MAC Enabling Multicast FilteringIgmp Snooping Static Multicast Router PortQuerier Igmp TableAdd Static Multicast MAC Add New Static Multicast Address to the ListNone Join PortConfiguring Gmrp Port Setting Description Factory DefaultGmrp enable Setting Description Factory Default Port Mode Setting Description Factory DefaultUsing Bandwidth Management Configuring Bandwidth ManagementGmrp Table Broadcast Storm ProtectionUsing Port Access Control Traffic Rate Limiting SettingsIeee Static Port LockMessage Exchange Configuring Ieee 802.1XDatabase Option Radius ServerServer Port Shared Key802.1X Re-Authentication Local User Database Setup802.1X Re-Authentication Local User Database Setup Static Port Lock802.1X Table Using Auto Warning Configuring Email WarningEmail Alarm Events Settings MoxaEtherDeviceSwitch0001@SwitchLocation Event TypesSystem Event Port EventEmail Settings Configuring Relay Warning Relay Alarm Events SettingsConfiguring Relay Event Types Activate your settingsRelay Alarm List Override relay alarm settingsUsing Line-Swap-Fast-Recovery Using Set Device IPConfiguring Line-Swap Fast Recovery Enable Line-Swap-Fast-RecoveryConfiguring Set Device IP Set up the connected devicesUsing Diagnosis Mirror PortOutput data stream Bi-directionalUsing Monitor Monitor by SwitchPing Using the MAC Address Table Monitor by PortUsing Event Log ALLEDS Configurator GUI Starting EDS Configurator Broadcast SearchUpgrade Firmware Search by IP addressModify IP Address Export Configuration Import Configuration Unlock Server EDS-726 Series User’s Manual MIB II.1 System Group MIB II.2 Interfaces GroupMIB II.4 IP Group MIB II.5 Icmp GroupMIB II.10 Transmission Group MIB II.11 Snmp GroupMIB II.17 dot1dBridge Group Public Traps Private TrapsModular Managed Switch System, EDS-72610G InterfacePower Gigabit Ethernet Interface Module, IM seriesMechanical Fast Ethernet Interface Module, IM series Optical FiberInterface Environmental Regulatory ApprovalsService Information Moxa Internet Services Following services are providedProblem Report Form Serial NumberProduct Return Procedure