Philips HTS8100 Setting the TV Display, Repeat steps C ~ D for other settings, Pan Scan

Getting Started (continued)

If the language you want is not available in the list, select { Others }.

Use the numeric keypad 0-9 on the remote control to enter the 4-digit language code ‘XXXX’ (see last page) and press OK to confi rm.

E Repeat steps C ~ D for other settings.

Helpful Hints:

–During DVD playback, you can switch the audio and subtitle languages by pressing the AUDIO and SUBTITLE buttons on the remote control. However, this does not change the default settings you have made here.

–For some DVDs, the subtitle/audio/menu language can only be changed via the DVD disc menu.

Setting the TV Display

Set the aspect ratio of this unit according to the TV type you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.

A In disc mode, press SETUP on the remote control.

B Press cursor right key repeatedly to select { Video Setup Page }.

C Select { TV Display } in the menu and press cursor right key.

Video Setup Page

TV Type
TV Display	4:3 Pan Scan
Picture Setting	4:3 Letter Box
Component	16:9 Wide Screen
Progressive
Adv Picture

{4:3 Pan Scan }

Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted

to fi t your TV.

{4:3 Letter Box }

Select this if you have a conventional TV. In this case, a wide picture with black bands on the upper and lower portions of the TV will be displayed.

{16:9 Wide Screen }

Select this if you have a wide-screen TV.

D Select one of the options and press OK to confi rm.

English

23