Philips HTS8100 quick start 480p

English

Setup Menu Options (continued)

Video Setup Page (underlined options are the factory default settings)

Adv Picture	continued ...
	{ HDMI Video }– Select a suitable video resolution depending
	on the capability of the connected TV/device
	to further enhance the HDMI video output.
	{ 480p }
	Progressive output in 480 lines for NTSC TV.
	{ 576p }
	Progressive output in 576 lines for PAL TV.
	{ 720p } - (if a HDMI TV is connected)
	Progressive output upscale to 720 lines.
	{ 1080i } - (if a HDMI TV is connected)
	Interlaced output upscale to 1080 lines.
	{ 1080p } - (if a HDMI TV is connected)
	Progressive output upscale to 1080 lines.
	{ Auto }
	The video output automatically follows the
	display’s supported resolution.
	Note: If no display appears on the TV due to
	unsupported resolution, use the Scart cable to
	connect this unit and your TV. Turn on your TV
	to the correct video input channel and adjust the
	resolution setting to 480p/576p.
	{ P-Scan Format } – Select a suitable TV screen display format.
	Note: This feature is only available if you have selected the { 16:9
	Wide Screen } in { TV Display } setup option.
	{ Superwide }
	Display the 4:3 picture disc on the wide-screen TV
	with non-linear stretching (centre position of the
	screen is stretched less than the side).
	{ 4:3 Pillar Box }
	Display the 4:3 picture disc on the wide-screen TV
	without stretching. Black bars will be shown on
	the both sides of the TV screen.
	{ Off }
	No aspect ratio adjustment is made when this
	option is selected.
	Note: The { Superwide } is only applicable for
	resolution: 720p, 1080i or 1080p.

42