Philips HTS8100 quick start Component, Yuv, Progressive Adv Picture

Setup Menu Options (continued)

Video Setup Page (underlined options are the factory default settings)

Component	Select the type of video output that matches the video
	connection between this unit and your TV.
	{ YUV }	–	For component video (Y Pb Pr) connection.
	{ RGB }	–	For SCART connection.

English

Progressive

Adv Picture

Before enabling the progressive scan feature, you must ensure that your TV can accept progressive signals (a progressive scan TV is required) and that you have connected this unit to your TV using the Y Pb Pr. See ‘Getting Started - Setting up the progressive scan

feature’ for details.
{ On }	–	Turn on progressive scan mode.
		Read the instructions on the TV and confi rm
		your action by pressing OK on the remote
		control.
{ Off }	–	Turn off the progressive scan mode.

It provides the picture settings to enhance the appearance and picture quality for disc playback.

Note: { DCDi }, {True Life } and { P-Scan Format } settings are only applicable for Progressive Scan output.

{DCDi } – Directional Correlation Deinterlacing. It is known by its smooth video content as it fills the missing lines.

{On }

Optimise the picture quality signifi cantly, especially during the slow motion play.

{Off }

Turn off the DCDi function.

{Gamma } – Adjust the intensity of the picture non- linearly (-7 to +7). A positive value enables you to bring out low level detail in dark scenes, while a negative value emphasises contrast.

{Chroma Delay }– Adjust the advance delay of chroma signal to produce a perfect clear picture (-3 to +3).

{True Life } – Increase the contrast and colour intensity to produce a more dynamic picture (00 to 05).

41