Q-Logic 3000, 3100 manual QLogic Adapter Flash Update-Windows Server, NX Live Menu Options

B–Flash Update

QLogic Adapter Flash Update—Windows Server

3.Format the USB Flash device to a FAT file system (if required):

a.Right-click the Start button, and then click Explore.

b.Right-click the USB Flash drive, and then click Format.

c.Format the USB Flash drive to a FAT file system.

4.Unzip the NX Live USB file into its own directory.

a.Right-click the file, click Open With, and then click Compressed (zipped) Folders.

b.Copy the two folders boot and slax onto the USB Flash drive.

5.Click the Start button, and then click Run.

6.Type cmd in the Open: box, and then click OK.

7.Change to the drive letter assigned for the USB Flash drive, for example:

C:\Documents and Settings>F:

8.Change the directory to the boot folder on the USB Flash drive.

9.Execute the bootinst.bat file. Press the ENTER key twice to complete the process of making the USB Flash drive bootable.

10.Insert the NX Live USB Flash drive into the server with the QLogic adapter.

11.Change any BIOS settings to permit the USB Flash drive to boot before the other devices on the system.

12.Use the menu options (see NX Live Menu Options) to show current board information, update the firmware, or reboot the system (remember to remove the NX Live USB if you need to revert back to the OS on the hard disk).

NX Live Menu Options

Here is an example of the NX Live menu options:

NX Live Firmware Update

Menu Options:

1.Show adapter information

2.Update to latest firmware on adapter

3.Reboot system if firmware has been updated Enter here:

QLogic Adapter Flash Update—Windows Server

This section provides information on how to perform a Flash update in Windows Server 2003, 2008, and 2008 R2. Note that the QLogic adapter is shipped with a default Flash version.

NE0154601-00 C B-3