Q-Logic 3100, 3000 manual Advanced Properties Parameters

7–Windows Server 2003, 2008, and 2008 R2 Driver Configuration NIC Driver Properties and Configuration

Table 7-1. Advanced Properties Parameters (Continued)

Parameter	Description
Large Receive Offload (LRO)	This parameter specifies the large receive
	offload—enable/disable options.
	 Registry Key: LRO
	 Default: Enabled
	 Values: Enabled/Disabled
Large Send Offload V1 IPv4	This parameter specifies the large send
	offload—enable/disable options.
	 Registry Key: LsoV1IPv4
	 Default: Enabled
	 Values: Enabled/Disabled
	 Size of LSO: 64K maximum
Large Send Offload V2 IPv4 a	This parameter specifies the large send
	offload—enable/disable options.
	 Registry Key: LsoV2IPv4
	 Default: Enabled
	 Values: Enabled/Disabled
	 Size of LSO: 64K maximum
Large Send Offload V2 IPv6 a	This parameter specifies the large send
	offload—enable/disable options.
	 Registry Key: LsoV2IPv6
	 Default: Enabled
	 Values: Enabled/Disabled
	 Size of LSO: 64K maximum

Locally Administered Address This is the locally administered address (LAA) that users/administrators can set on this interface to over- ride the permanent address of the QLogic adapter (that may have been Flashed into the hardware).

Registry Key: NetworkAddress

Format: Hex

Options: Value. (A value is required—enter the 12 hex bytes of the MAC address to be used, or not present.)

7-4 NE0154601-00 C