Q-Logic 3000, 3100 manual Updating the Flash on Multiple Standalone QLogic Adapters

B–Flash Update

QLogic Adapter Flash Update—Windows Server

Here is an example of a Windows Server nxflash --infooutput for local area connection 0:

C:\Users\Administrator\Desktop\4.0.223\utils>nxflash.exe -i “Local Area Connection 0” --info

NETXEN Port is Port 0
Verifying flash...Done.
Board Type	: 0x24 (Quad Gig LP)
Board Chip Rev	: B1
Serial Id	: QG87BK0092
Efuse ID	: 0x4e36343633340f08
Firmware version (on Flash)	: 4.0.228
Active Firmware version	: 4.0.229
Firmware in	: CUT-THRU mode
Driver version	: 4.0.229
BIOS version	: 2.0.0
MAC Addr 0	: 00:0E:1E:00:79:DC
MAC Addr 1	: 00:0E:1E:00:79:DD
MAC Addr 2	: 00:0E:1E:00:79:DE
MAC Addr 3	: 00:0E:1E:00:79:DF
Subsystem ID	: 0x01244040
PHY Type	: UNKNOWN PHY
PXE Status	: Disabled

Updating the Flash on Multiple Standalone QLogic Adapters

The Flash can be updated on multiple QLogic adapters on the same host using one of the following procedures.

To perform updates from the same directory tree, type the following commands sequentially after the Flash update has completed. In these commands, n represents two different port numbers, for example, “Local Area Connection 4” and “Local Area Connection 5” (the quotation marks are required).

nxflash.exe -i “Local Area Connection n” --all (first QLogic adapter)

nxflash.exe -i “Local Area Connection n” --all (second QLogic adapter)

NE0154601-00 C B-7