Q-Logic 3000, 3100 manual Click Repair QLogic Advanced Network Config Service

Page 41

6–Windows Server 2008 and 2008 R2 Driver Installation Windows Server 2008 and 2008 R2 Teaming Driver Installation and Configuration

If the base NIC driver was installed the first time the driver package was installed (see the Typical Installation option in Figure 6-3), then you need to re-install the driver to include Teaming:

1.Repeat Steps 1 through 5 from “Windows Server 2008 NIC Driver Installation and Verification” on page 6-2.

The QLogic Advanced Network Config Service dialog box displays (Figure 6-9).

Figure 6-9. Windows Server 2008—Advanced Network Config Service Setup

Wizard

2.Click Repair QLogic Advanced Network Config Service.

3.Click Finish.

NE0154601-00 C

6-7

Image 41
Contents User’s Guide Document Revision History Table of Contents Windows Server 2003 Driver Installation Hardware InstallationWindows Server 2008 and 2008 R2 Driver Installation Windows Server 2003, 2008, and 2008 R2 Driver ConfigurationLinux Configuration for Bonding Mode and Virtual LAN Vlan Linux Driver Installation and ConfigurationFirmware Management Troubleshooting GuidelinesDiagnostic Utility Commands Flash Update Glossary Index List of Figures 11-3 QLogic Adapter Device IDs 11-2 Troubleshooting Tools in LinuxList of Tables Preface  Check the QLogic Web site for updatesIntended Audience Related MaterialsAvailability Technical Support nx3fwct.bin  C\WINDOWS\system32\drivers  /lib/modules/kernel-version/kernel/net/netxenKnowledge Database TrainingContact Information Preface Technical Support Xii NE0154601-00 C Obtaining the Latest Software Release Information OverviewQLogic 3000 and 3100 Series Intelligent Ethernet Adapters QLogic 3000 and 3100 Series Intelligent Ethernet AdaptersPage Cable Specifications-Optical Cable SpecificationsSystem Requirements Hardware RequirementsSupported QLogic Adapters Cable Specifications-CopperSFP+ Optical Module Requirements Product Cable Type Network Cable LengthPre-installation Checklist QLogic Adapter Installation and VerificationQLogic Adapter Installation Quick StartVerify the QLogic Adapter Installation Windows Server Driver InstallationOn Linux systems, execute the following command LinuxNx3fwct.bin Nx3fwmn.bin Windows ServerWindows Server 2008 and 2008 R2 Install the Driver RPM Linux Driver InstallationRed Hat Download the driver package from the QLogic Web siteSuse Type the following command to install the binary RPMQLogic Adapter Configuration QLE3044 Installation Hardware InstallationQLE3044 Status LEDs Ethernet Port MappingQLE3044 LED Definitions Port Number PCI Function Ethernet InterfaceQLE3044 Bracket Removal QLE3044 Bracket Removal and ReplacementQLE3142 QLE3142 InstallationSFP+ Optical Module SFP+ OpticalQLE3142 Status LEDs QLE3142 Bracket Removal and ReplacementQLE3142 Bracket Replacement Firmware ROM Image Location Windows Server Driver InstallationDriver Checklist Windows Server 2003 NIC Driver Installation Windows Server NIC Driver Installation and VerificationWindows Server 2003-NIC Driver Location Information Windows Server 2003-Browse for Folder Click Finish Windows Server 2003 NIC Driver Installation VerificationFile Directory Uninstall the NIC DriverWindows Server 2008 2008 R2 Driver Installation Click Next Windows Server 2008 NIC Driver InstallationSetup Wizard dialog box opens see Figure Windows Server 2008-License Agreement Windows Server 2008 Installation OptionsClick Next to begin the installation Select Installation Folder dialog box opens see FigureClick Close to complete the installation Windows Server 2008 NIC Driver Installation VerificationWindows Server 2008-Installation Options Windows Server 2008 and 2008 R2 Teaming Driver InstallationClick Repair QLogic Advanced Network Config Service Windows Server 2008 and 2008 R2 Teaming Driver Configuration NE0154601-00 C For more help, see the information in the Status box Right-click Teams, and then click Create Team Figure13. Windows Server 2008 Teaming-Create Team Window For more help, see the information in the How-tobox Windows Server 2008 NIC Driver Uninstall Previous Version16. Windows Server 2008 Teaming Uninstall Procedure Windows Server 2008 NIC and Teaming Driver UninstallPage NIC Driver Properties and Configuration Windows Server 2008, and 2008 R2 Driver ConfigurationAdapter Properties-General Tab Parameter Description Advanced Properties ParametersAdvanced Properties Parameters Advanced Properties Parameters Advanced Properties Parameters Advanced Properties Parameters Vlan ID Network Connections Window QLogic Adapter ConfigurationLocal Area Connection Properties Dialog Box Internet Protocol TCP/IP Properties dialog box opens Figure QLogic Adapter Diagnostic TestsAdapter Properties-Diagnostics Tab Windows Server 2003 Performance Performance Testing the QLogic Adapter with ntttcpRun ntttcp Ntttcp OverviewCommand Default Ntttcps and ntttcpr Command Line OptionsNtttcps and ntttcpr Command Line Options Data Type Range a Value Tcp1323OptsHex Value Meaning RangeModifying the Tcp1323Opts Parameter Creating the Tcp1323Opts Parameter CurrentControlSet Services Tcpip Parameters10. Registry Editor-Parameter Directory 13. Edit Dword Value Window-Tcp1323OptsParameter Setting the TcpWindowSize Parameter15. Edit Dword Value Window TcpWindowSize Parameter 14. Modifying the TcpWindowSize ParameterPage Locate the Firmware ROM Image Linux Driver Installation ConfigurationLinux Driver Checklist Locate the Driver File Enable the Inbox Kernel GPL and Commercial DriversVerify the Firmware Version Verify the Driver Version and Module InformationLib/modules/uname -r/kernel/drivers/net/netxen directory Check for MSI-X SupportRemove or rename the netxennic.ko file from Some older Linux kernel versions may not support MSI-X Output of this command is similar to the followingInbox Kernel GPL Driver and Blacklisting QLogic Adapter Driver Installation RPM Format Preparing for QLogic Adapter Driver InstallationInstall the Linux Driver Source in RPM Format Install the BinaryType the following command to install the tools Install the QLogic ToolsLinux QLogic Adapter Driver Options  nxflash  nxudiag  phantomcoreP3Parameters are listed in Table Modprobe Command Optional ParametersParameter Description Default Range Uninstall the Commercial GPL Driver and Tools Package Configure the QLogic Adapter on LinuxDiagnostic Tests for the QLogic Adapter Nxudiag -i ethn commandPerformance Tools Linux Performance TuningUsing the iperf Tool Here is an example of iperf from the client side OptimizationHere is an example of iperf from the server side Type the following command to bring down the bond Linux Configuration for Bonding Mode and Virtual LAN VlanLinux Bonding Mode Output for this command is Active-Backup or Mode=1After 50 seconds, the dmesg command will print Following message is displayed========= down state Round-Robin or Mode=0Bonding Driver Options Dmesg command output isBonding Driver Parameters  miimon or arpinterval  arpiptargetArpinterval QLogic Adapter Bonding Modes Under LinuxBonding modes are described in Table Mode Mode Name DescriptionType the following command if the driver has not been loaded Configuring Virtual LAN Vlan Under LinuxPage Windows Server Dynamic Firmware Download Firmware ManagementLinux Dynamic Firmware Download Check for the following entryFirmware Management Linux Dynamic Firmware Download Troubleshooting Guidelines Troubleshooting Tools Additional Configuration for Windows Server 2008 TeamingWindows Server Tools What is ProvidesLinux Tools Tool What it ProvidesCaveats Check for System ErrorsLinux MSI-X Interrupts for LinuxQLogic Adapter Device IDs PCI Express SlotYou should see a message similar to Product Device ID DescriptionC0 10 00 02 00 02 80 00 00 00 10 0b 00 82 04 00 Command Description Diagnostic Utility CommandsTable A-1. Diagnostic Utility Commands NoCRegs Flash Update Options Flash UpdateFlash Update and Tool Guidelines NX Live USB NX Live CDHere is an example of the NX Live menu options QLogic Adapter Flash Update-Windows ServerNX Live Menu Options Command Definition Description Using the Flash UtilityTable B-1. Flash Utility Commands-Windows Server Name.xml Flash Update ProcedureFlash Update QLogic Adapter Flash Update-Windows Server Updating the Flash on Multiple Standalone QLogic Adapters When invoking the nxflash utility, use the following syntax QLogic Adapter Flash Update-LinuxTable B-2. Flash Utility Commands-Linux Tmp Cd/opt/netxen Here is an example of a Linux nxflash output Page Glossary Receive side scaling Preboot execution environmentSoftware package file format Index SymbolsHw A-1 ExtLB A-2Flash --FLASH A-1 Command B-1, B-4, B-8nxudiag Glossary-1 Interface A-1,B-4,B-8--IntLB A-1ipconfigLacprate parameter 9-5--LED A-1 List B-8SFP+ Glossary-2 Pxe-off B-5,B-9 Pxe-on B-4,B-9Version A-2,B-5,B-9VLAN Glossary-2VLAN configuration Page Page Corporate Headquarters QLogic Corporation
Related manuals
Manual 120 pages 4.97 Kb

3000, 3100 specifications

The Q-Logic 3100 and 3000 series are advanced networking solutions designed for high-performance data centers and enterprise environments. Known for their innovative technology, these switches and adapters are tailored for seamless integration in modern computing infrastructures, offering scalability and robustness essential for today's demanding applications.

One of the standout features of the Q-Logic 3100 and 3000 series is their support for high-speed data transmission, reaching up to 16 Gbps in Fibre Channel connections. This capability ensures minimal latency and exceptional throughput, which is critical for applications that require rapid data access and processing, like virtualization and cloud computing.

Both series incorporate cutting-edge virtualization technologies, enabling multiple environments to be managed efficiently through a single physical instance. This support for virtualization reduces hardware costs and maximizes resource utilization, a vital aspect for organizations looking to optimize their IT investments. Additionally, the series provides enhanced Quality of Service (QoS) features, which prioritize data traffic and ensure stable performance across various applications.

Security is another primary concern addressed by the Q-Logic 3100 and 3000 series. They offer advanced security features, including hardware-based encryption, which protects data in transit and at rest. Access control mechanisms are in place to prevent unauthorized access, making these solutions suitable for organizations that handle sensitive information.

The Q-Logic 3100 and 3000 series are built with reliability in mind. They include built-in redundancy features, such as dual power supplies and hot-swappable components, which reduce the risk of system failure and improve overall uptime. This reliability is crucial for businesses that operate around the clock, as downtime can lead to significant financial losses.

Configuration and management of the Q-Logic series are simplified through user-friendly interfaces and comprehensive management tools. These tools allow administrators to monitor performance, configure settings, and troubleshoot issues efficiently, thereby enhancing operational productivity.

In summary, the Q-Logic 3100 and 3000 series stand out as exemplary solutions for high-performance networking needs. With their impressive speed, support for virtualization, strong security features, and robust reliability, these products continue to solidify their position as leaders in the networking technology landscape. As businesses evolve and grow, these innovative solutions are poised to adapt and meet the challenges of the future.