| Software Installation |
Using MOXA PComm Utility
The PComm Diagnostic program is a useful tool for checking the status of MOXA’s multiport boards. The program can be used to test internal and external IRQ, TxD/RxD, UART, CTS/RTS, DTR/DSR, etc. Use this program to ensure that your MOXA boards and ports are working properly.
To start the program, click on Start # Programs # PComm Lite 2000(XP Ver 1.2) # PComm Diagnostic.
NOTE
The PComm Lite software can downloaded for free from Moxa’s website at
www.moxa.com/support/free_downloads.htm.
Using Event Log
To use the Event Log to check the installation of your MOXA boards, click on Start # Settings
#Control Panel # Administrative Tools # Event Viewer to enter the Event Viewer utility. Look under the System category to find the latest information relevant to MOXA’s drivers.