Moxa Technologies CP-118U user manual Continue from in the next section, Configuring the Ports

CP-118U User’s Manual Software Installation

6.Select MOXA Smartio/Industio Family multiport board in the Select OEM Option window, and then click on OK to start installing the driver.

7.The Moxa Smartio/Industio Configuration Panel window appears. Click on Add to open the Property configuration window to change port settings and set advanced FIFO configuration options.

8.Continue from Step 3 in the next section, “Configuring the Ports.”

Configuring the Ports

Follow the instructions in this subsection if the CP-118U Windows NT driver is already installed, and you wish to re-configure a board’s ports or configure the ports of a newly installed board. In addition to the procedures listed below, you may also click on Start # Programs # MOXA Utility # MOXA Smartio/Industio Configuration Panel # Property, and then refer to the instructions in the previous section, “Installing the Driver for the First Time.”

3-39