Moxa Technologies user manual CP-118U User’s Manual Software Installation

CP-118U User’s Manual Software Installation

8.Press Enter to return to the main screen.

Smartio Family Installation Utility (Ver 1.6)

Smartio Family Basic Configuration

	Board No.		Board Type	I/O Address		Interrupt	Bus/Dev No.
	1		CP-118U	AC00		5	2/13
	2		None	-------------		-------------	-------------
3			None	-------------		-------------	-------------
4			None	-------------		-------------	-------------
			PgDn: getty Setting		Esc: Exit
		Enter: Confirm Input Value			Tab: Change Item
9. Press Esc to save the configuration and exit.
	Save configuration changes? (Y/N)

10.	The driver files will be copied to the SCO system. Press any key to continue.
	--------------------------[Message] --------------------------
	Copying driver files and configuring system. Please wait….
	Press any key to continue! _
11.	Press Y to rebuild the system.
	--------------------------[Message] --------------------------
	Do you want to rebuild the system? (y/n)_
12.	The window shown below will open next.
	--------------------------[Message] --------------------------
	Do you want to rebuild the system? (y/n)_
	Rebuilding kernel. Please wait….

13.After the system is rebuilt, the system will return to shell command. At this point, you can begin to use your MOXA Smartio Multiport Serial Board.

--------------------------[Message] --------------------------

Do you want to rebuild the system? (y/n)_ Rebuilding kernel. Please wait….

Rebuilding kernel completed.

Please remember to manually reboot your system later. Press any key to continue. _

3-52