Moxa Technologies CP-118U user manual Sco

CP-118U User’s Manual Software Installation

SCO

MOXA provides drivers that allow you to use the following serial board products under Linux.

!Universal PCI Boards: CP-118U, CP-168U, CP-104UL, CP-104JU, CP-102U, CP-102UL

!PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI

!ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS

Follow the steps given in this section to install the SCO driver. Note that the SCO driver provided by Moxa only supports RS-232. Consequently, the SCO driver will only work with CP-118U ports that are configured for RS-232. MOXA provides drivers for the following versions of SCO:

!SCO OpenServer

!SCO UnixWare 7

!SCO UnixWare 2.1

The following steps are for installing the driver under SCO OpenServer. The installation procedures for SCO UnixWare 7 and SCO UnixWare 2.1 are similar.

1.Copy the driver file .tar to your host.

2.#tar xvf <driver tar file> /tmp/moxa/mxintall /tmp/moxa/sco.tar

3.# cd/tmp/mxinstall

# ./mxinstall

4.The window shown below will open next. Press any key to continue.

Copyright© 2004 Moxa Technologies Co., Ltd.

All Rights Reserved.

MOXA Smartio Family Device Driver Installation (Ver. 1.6)

For SCO UNIX System V/386 Release 3.2

Tar files, please wait…..O.K.

Press any key to continue

3-50