EM-1240-LX User’s Manual | Getting Started |
Telnet
If you know at least one of the two IP addresses and netmasks, then you can use Telnet to connect to the EM-1240-LX’s console.
| Default IP Address | Default Netmask |
| | |
LAN 1 | 192.168.3.127 | 255.255.255.0 |
| | |
LAN 2 | 192.168.4.127 | 255.255.255.0 |
| | |
Telnet can be used locally by using a crossover Ethernet cable to connect your computer to the EM-1240-LX, or over a LAN or the Internet. The default IP addresses and netmasks are shown above. To login, type the Login name and password as requested. The defaults are:
Login: root
Password: root
Once you open the “msh command shell” you can proceed to configure the EM-1240-LX’s network settings, as described in the next section.
ATTENTION
y Serial Console Reminder: Remember to choose VT100 as the terminal type. Use the CBL-RJ45F9-150 cable that comes with the EM-1240-LX to connect to the serial console port. If you are not able to conect on the first try, unplug and then re-plug the EM-1240-LX’s power cord.
yTelnet Reminder: When connecting to the EM-1240-LX over a LAN, you must configure your PC’s Ethernet card to be on the same subnet as the EM-1240-LX you wish to contact.
