Moxa Technologies CP-168U user manual Windows 95/98

Page 26

Windows 95/98

The Windows 95/98 driver supports up to 128 serial ports, from COM1 to COM128. To fully utilize the advanced multi-process and multi-thread features of Windows 95/98, pure 32-bit Windows 95/98 virtual device port drivers (VxD) compliant with communication drivers (VCOMM) have been developed for the Smartio CP-168U and other MOXA multiport boards. The drivers conform to the Win32 COMM API standard.

Installing the Driver

Thanks to Windows 95/98’s Plug and Play capability, you can easily plug the Smartio CP- 168U board into an available PCI slot, and then get to work right away with very little installation effort. Windows 95/98 will automatically detect the presence of the new board, and prompt you to install the software driver. You simply need to have the driver CD available to complete the installation process.

A maximum of 4 Smartio CP-168U boards can be installed in one system, provided sufficient I/O address and IRQ number resources are available.

The following flow chart illustrates the driver installation stages of the Smartio CP-168U boards. Each stage will be discussed later in more detail.

3-10Smartio CP-168U User’s Manual

Image 26
Contents Smartio CP-168U User’s Manual Page Disclaimer Copyright NoticeTrademarks Page Moxa Internet Services Page Table of Contents Page Introduction OverviewOperating System Support Moxa Serial Comm Tool PCI SolutionSurge Protection Features Package Checklist See , Connection Cables and Cable Wiring, for cable wiring Installation GuideInstallation See , Serial Programming ToolsPage Hardware Installation Installing the Smartio CP-168U boardAddresses, which are assigned automatically by the PCI Bios Each board must occupy one unique IRQ and four 8-byte I/OSoftware Installation Windows NTInstalling the Driver First Time Driver InstallationSoftware Installation 4Smartio CP-168U User’s Manual Software Installation Configuring the Board and Ports Re-Configuring Port SettingsConfiguring Another CP-168U Board Removing an Existing CP-168U Board Configuration Updating the Driver Removing the DriverWindows 95/98 See the section, Board and Ports Ready Windows Software Installation Port Configuration Software Installation Board and Port Ready Configuring the Board and Ports 18Smartio CP-168U User’s Manual Click on Update Driver Windows 2000/XP Location , checkmark Include this location Select Install from a list or specificWindows Windows XP Should locate the Software\Win2K\V1.522Smartio CP-168U User’s Manual Software Installation Next Welcome to the Found New Software Installation 26Smartio CP-168U User’s Manual Software Installation How to Check the Installation Device ManagerMoxa PComm Utility Event LogRemoving the Driver Click OK to proceed with the un-installation of the board 32Smartio CP-168U User’s Manual PComm Programming Library PComm InstallationSerial Programming Tools Utilities Diagnostic for Moxa boards only Monitor for Moxa boards under Windows NT/2000/XP Terminal Emulator Emulator6Smartio CP-168U User’s Manual DB62 Female Connector Pinouts Connection Cables and Cable WiringRS-232 Cable Wiring Individual Port Pinouts-DB9 and DB25 Male RS-232Troubleshooting General TroubleshootingWindows NT system panics blue screen System fails to find the Smartio CP-168U board Page Specifications Technical ReferenceMoxa Uart Return Procedure
Related manuals
Manual 86 pages 16.98 Kb