Software Installation
Configuring the Board and Ports
Follow the procedures given below to
In addition to following the procedures listed below, you may also click on [Start]
[Programs] | [MOXA Utility] [MOXA Smartio/Industio Configuration Panel] |
[Property] | [Port Setting]. |
Since this is a PCI board, once a new board is added, or an existing board is removed, the board’s configuration will be automatically added or removed by the operating system when you restart the PC.
1.Open the [Control Panel], click on the [System] icon, select the [Device Manager] tab, and then click on the plus sign to the left of Moxa Smartio/Industio multiport board.
2.Click on the desired
3.Select the [Ports Configuration] tab, click on the specific port, and then click on the [Port Setting] button.
Smartio