Lucent Technologies 555-230-796 manual DIP Switch Configuration

Installation

Table 2-1. DIP Switch Configuration

Switch #	OFF	ON
1	Normal operation	Reserved
2	Normal operation	Dedicated lines
3	Normal operation	Reserved
4	Normal operation	Test mode

NOTE:

If you are using a standard central office line, you do not have to change the factory-set DIP switches. Check with your system administrator before making any changes. Your system administrator may have changed DIP switch 3 to the ON position for normal operation. Do not change this setting without contacting your system administrator.

2.Connect one end of the line cord provided with the Remote Module to the telephone company phone jack and the other end to the LINE jack of the Remote Module.

3.Connect the DEFINITY telephone to the PORT jack of the Remote Module by using the cord provided with the telephone.

! CAUTION:

Do not plug the line cord provided with the Remote Module into the PORT jack of the Remote Module. Damage to circuits may result.

Issue 2 July 1997 2-5