Moxa Technologies 5110 Series user manual Accessible IP Settings

Page 47

NPort 5110 Series User’s Manual		Web Console Configuration
	TCP port
	Setting	Factory Default	Necessity
	1 to 65535	4001	Required

The TCP port that other devices must use to contact this device. To avoid conflicts with standard TCP ports, the default is set to 4001.

TCP alive check time

Setting	Factory Default	Necessity
0 to 99 min	7 min	Optional

0 min: TCP connection is not closed due to an idle TCP connection.

1 to 99 min: NPort 5110 automatically closes the TCP connection if there is no TCP activity for the given time.

Accessible IP Settings

NPort 5110 uses an IP address based filtering method to control access to itself.

Accessible IP Settings allows you to add or block remote host IP addresses to prevent unauthorized access. Access to NPort 5110 is controlled by IP address. That is, if a host’s IP address is in the accessible IP table, then the host will be allowed to access the NPort 5110. You can allow one of the following cases by setting the parameter.

!Only one host with a specific IP address can access the NPort 5110 Enter “IP address/255.255.255.255” (e.g., “192.168.1.1/255.255.255.255”).

!Hosts on a specific subnet can access the NPort 5110

Enter “IP address/255.255.255.0” (e.g., “192.168.1.0/255.255.255.0”).

5-25

Image 47

Contents First Edition, December NPort 5110 Series User’s ManualDisclaimer NPort 5110 User’s ManualCopyright Notice TrademarksTable of Contents Ethernet Cables Ethernet Port Pinouts Serial Port PinoutsIntroduction Overview Package ChecklistProduct Features Product Specifications Getting Started Panel Layout Connecting the HardwarePanel Layout Connecting the HardwareConnecting the Power LED Name LED Color LED Function Connecting to the NetworkConnecting to a Serial Device LED IndicatorsInitial IP Address Configuration Initializing NPort 5110’s IP Address Factory Default IP AddressNPort 5110 Administration Suite Default IP addressTelnet Console Page Page Serial Console 19200, n, 8 Page Page Choosing the Proper Operation Mode TCP Client Mode TCP Server ModePair Connection Mode UDP ModeReal COM Mode Ethernet Modem Mode Web Console Configuration Opening Your Browser NPort 5110 Series User’s Manual Web Console Configuration Web Console Basic SettingsWeb/Telnet Console Server nameMethod Function Definition Network SettingsIP configuration DNS server 1 / DNS server IP addressNetmask GatewayContact Snmp SettingsIP Address Report Community nameAuto report period Serial SettingsAuto report to IP Auto report to TCP portSerial Parameters Max connection Operating SettingsReal COM Mode TCP alive check timeDelimiter Setting Factory Default Necessity To FF hex None OptionalSetting Factory Default Necessity To 65535 ms Optional Max connection 2 toInactivity time TCP Server ModeSetting Factory Default Necessity To FF None Optional Local TCP port Setting Factory Default Necessity 4001 RequiredCommand port Setting Factory Default Necessity 966 OptionalTCP Client Mode Delimiter TCP connect on Destination IP addressDestination IP address 2/3/4 UDP Mode Local listen port Pair Connection Slave Mode Pair Connection Master Mode Disconnection request from local site Ethernet ModemDial-in Dial-outDisconnection request from remote site AT CommandsAT&D RegistersTCP port Setting Factory Default Necessity 4001 Required Accessible IP SettingsMail Server Auto Warning SettingsAuto Warning E-mail and Snmp Trap Snmp Trap Server Event TypeDSR changed DCD changedLoad Factory Defaults Change PasswordOverview Installing Windows Administrator Configuration Configuring Windows AdministratorInstalling Windows Administrator Page Page Page Configuration Broadcast Search Page Page Unlock Password Protection Fixed LockUnlock BlankConfiguring NPort Page Upgrade Firmware Export/Import Monitor Select Add Target Page Page Page Page Port Monitor Off-line COM Mapping COM MappingOn-line COM Mapping On-line COM MappingSelect COM Settings to modify COM No., default setting, etc Page Fast Flush only flush local buffer Page Page Select Apply change Off-line COM MappingIP Location Page IP Serial LIB How to install IP Serial Library What is IP Serial Library?Why Use IP Serial Library? Example Program IP Serial LIB Function GroupsPinouts and Cable Wiring DB9 Male RS-232 port pinouts for NPort Port Pinout DiagramsEthernet Port Pinouts Serial Port Pinouts Ethernet Cables Cable Wiring DiagramsWell Known Port Numbers TCP Socket Application ServiceNPort 5110 Series User’s Manual Well Known Port Numbers UDP Socket Application ServiceNPort 5110 Series User’s Manual Well Known Port Numbers Snmp Agents with MIB II & RS-232 Like Groups Address Translation MIB System MIB Interfaces MIBTCP MIB Snmp MIB Input Signal Table Output Signal Table Auto IP Report Protocol AP ID & Hardware ID Mapping Table Auto IP Report FormatInfo n ID ListService Information Following services are provided Moxa Internet ServicesMoxa Product NPort Serial Number Problem Report Form Moxa NPortProduct Return Procedure