8.Click [OK] in the “Individual Port Setting” and the “Property” dialog boxes to go back to the “MOXA Configuration Panel” dialog box. Click [OK] to finish the configuration.
However, if you installed more than one board, click [Add] and repeat steps 6 and 7 to configure another board. Up to four Intellio C218Turbo/PCI boards can be installed in a system.
9.When configuration is done, click on [OK] button for “Network ” dialog box.
10.Restart Windows NT system. The latest configuration will not take effect unless the system restarts.
Note ! Please double check if all the Intellio C218Turbo/PCI components: Control Board, link cable and external cable/box, are connected and fastened tightly in order to ensure the system and driver will start successfully later.
11.Once the system restarts, you may check the event log issued by MOXA drive to see if the ports of the board are initialized successfully.