Moxa Technologies C168HS Port Monitoring, Tx Fifo Trigger, RTS/CTS Hardware Flow Control

Tx FIFO Trigger

Tx FIFO sizes from 1 to 16 bytes are available, and the default value is 16 bytes.

RTS/CTS Hardware Flow Control

This feature is for more flexible driver behavior. If set to “Disable” (default), CTS signal is not needed for tty port to transfer data and RTS/CTS hardware flow control function in driver is disabled. On the contrary, if set to “Enable”, CTS signal is needed for tty port to transfer data and RTS/CTS hardware flow control function in driver is enabled.

Port Monitoring

This utility gives you a quick view about all the MOXA ports' activities. You can easily learn each port's total received/transmitted (Rx/Tx) character count since the time when the monitoring is started. Rx/Tx throughputs per second are also reported in interval basis (e.g. the last 5 seconds) and in average basis (since the time the monitoring is started). You can reset all ports' count by <HOME> key. <+> <-> (plus/minus) keys to change the displaying time interval.

Press Enter on the port, that cursor stay, to view the port's communication parameters, signal status, and input/output queue.

3-32Smartio C168H/HS User’s Manual