3.7 Your Configuration Screens
You have four configuration screens:
V1
Use this screen to display and set the communication parameters for each port.
V2
Use this screen to display and set locations 1 ... 32 of the Modbus
Address Map table for each port.
V3
Use this screen to display and set locations 33 ... 64 of the Modbus
Address Map table for each port.
V4
Use this screen to Save or Initialize the BM85 configuration.
Help Screens: V5, V6, V7, V8
You have four Help screens that you can access during configuration. You can select the Help screens by selecting screens V5, V6, V7, or V8. Pressing the `question mark` ( ? ) key will display Help for the configuration screen you are currently using.
3.7.1Entering Commands Into Your Screens
When the BM85 is initially powered up for configuration, the V1 screen is shown for port 1. You can begin entering the port 1 parameters immediately.
The currently active port is always shown at the bottom line of your screen.
To select another screen for the active port, enter commands V1, V2, V3, or V4. To select another port, enter commands P1, P2, P3, or P4.
When you enter the configuration commands, you can enter them singly or as a string. Press ENTER to complete the entry. To correct keystrokes in an entry, press DELETE. To cancel an entry before completing it, press ESCAPE.
44 Configuring the Modbus Models | 31007492 |