Schneider Electric none manual Your V1 Screen Layout

3.8Your V1 Screen

3.8.1Your V1 Screen Layout

Figure 11 shows a typical V1 screen. Valid commands are listed on the screen.

MODICON MODBUS BRIDGE/MUX ± Ver. 1.0

Copyright (c) 1989 MODICON, Inc., Industrial Automation Systems Group

MODBUS PORTS CONFIGURATION [V1]

Modbus Plus Address = 24

<COMMANDS>					[OPTIONS]
<P>PORT NUMBER#	1	2	3	4	[1, 2, 3, 4]
<T>PORT TYPE	master	slave	network	slave	[m, s, n, x]
<N>Slave Dev Addr	±	1	±	230	[1±247]
<B>Baud Rate	9600	1200	2400	9600	[50±19200]
<S>Stop Bits	1	2	1	1	[1, 2]
<R>Parity	even	none	even	even	[n, o, e]
<M>Mode	rtu	ascii	rtu	rtu	[a, r]
<Y>Priority	1	2	3	4	[1±4]
<L>Link Timeout	±	20	10	600	[1±3000]
<F>Modem Booster	±	yes	yes	no	[y, n]
>>Valid Commands:[V1 V2 V3 V4 P T N B S R M Y L F]			Keys:[Enter Esc ?±help]
Active Port 1>> __

Figure 11 Typical V1 Screen: Modbus Ports Configuration

46 Configuring the Modbus Models 31007492