Pelco VMX300-E installation manual Installation, Parts List, USER-SUPPLIED Parts

Installation

PARTS LIST

Qty Description

1VMX300 workstation

1Mouse

1Keyboard

1VGA adapter

1RCA-to-BNC video input adapter (-1 models)

2Power cords (one USA standard and one European standard)

2Adjustable support rails with screws

2Mounting brackets with screws and nuts

2Rack mount ears with screws

2Keys

1VMX300 Resource CD

USER-SUPPLIED PARTS

In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:

•One or two VGA or SVGA monitors for each VMX300(-E) workstation (the second monitor is optional but recommended). Monitors are not included with the VMX300(-E), but can be ordered separately from Pelco; any VGA or SVGA monitor can be used.

•(-1 models and -4 models) BNC video cable for connecting analog video sources to the VMX300(-E) workstation.

•Uninterruptible power supply (UPS).

NOTE: When connecting the workstation to a 230 VAC or higher power source, the use of an UPS, such as model PW9120 700i (manufactured by Powerware®) or equivalent, is required to comply with CE-marking requirements per EMC Directive 89/336/EEC.

The following parts may be needed, depending on the types of devices you are connecting to the VMX300(-E) workstation (refer to External Devices on page 27 for details on device connections and user-supplied parts):

•Shielded twisted pairs cable that meets or exceeds the basic requirements for EIA RS-232 applications

•Null modem cable

•RS-232 to RS-422 serial port adapter