Pelco VMX300-E installation manual KBD300A Keyboard, KBD300A Direct Serial Connection

Page 33

KBD300A KEYBOARD

1.Use the RJ-45 straight data cable that comes with the KBD300A to connect the keyboard to the RJ-45 wall block, provided in the KBDKIT.

2.Connect the power supply (provided in the KBDKIT) to terminals 3 and 4 on the wall block. Polarity is unimportant.

3.Complete the connection as described for the appropriate communication mode:

Direct Serial: Use a modified null modem cable (user-supplied) with a DB9 connector at one end. Cut the other end to expose the individual wires, so they can be connected directly to the wall block. Complete the following steps to connect the devices (refer to Figure 27):

a.Connect the DB9 end of the cable to one of the RS-422 COM ports (COM 3 or 4) on the VMX300(-E).

NOTE: If your system contains more than one VMX300(-E) workstation, connect the keyboard to the workstation where the keyboard will be used.

b.Connect the wires exposed at the other end of the cable to the wall block.

c.Change the settings for the VMX300(-E) RS-422 COM port (COM 3 or 4) as follows: 9600 baud, odd parity, 8 data bits, 1 stop bit. Refer to the Appendix on page 42 for instructions.

d.Add the Pelco Keyboard (KBD300) driver and the keyboard to the VMX300(-E) server configuration, and select Direct Serial as the connection type.

If you connect KBD300A keyboards to more than one VMX300(-E) workstation, you must run the Pelco Keyboard (KBD300) driver on each workstation that has a KBD300A keyboard connected to it. Refer to the VMX300(-E) Server Configuration Manual for instructions on adding drivers and devices to the server configuration.

e.Configure the keyboard with the following settings: CM6800 ASCII mode, RS-422, 9600 baud, odd parity, 8 data bits, 1 stop bit. Refer to the KBD300A Installation/Operation manual for instructions.

VMX300(-E)

CHANGE COM PORT

TO 9600 BAUD,

ODD PARITY

RS-422

 

 

 

 

 

 

12 VAC

VMX300(-E) COM 3 & 4

WALL BLOCK

4

5

WALL

RS-422 PIN ASSIGNMENTS

PIN ASSIGNMENTS

BLOCK

PIN 2

= Rx+

PIN 1

= Tx+

3

6

 

2

7

 

PIN 3

= Tx-

PIN 2

= Tx-

 

1

8

 

PIN 7

= Tx+

PIN 7

= Rx-

 

PIN 8

= Rx-

PIN 8

= Rx+

 

 

 

 

 

 

 

 

 

RS-422

 

 

 

 

 

 

STRAIGHT CABLE

KBD300A

Figure 27. KBD300A: Direct Serial Connection

C1552M-C (7/07)

29

Image 33
Contents Rear View AddendumVMX300-E Monitor Outputs How to Connect a Single Monitor to a VMX300-E WorkstationModel Workstations VMX300-E Analog Video InputsISO9001 Installation Manual Page Contents List of Tables List of IllustrationsImportant Safety Instructions Video Quality Caution Regulatory NoticesDescription VMX300 Models ModelsVMX300-E-CL-0 Client VMX300-E ModelsVMX300E-B Backup Server Compatible ProductsDocumentation Resources Typical Applications Matrix SwitchersPelco Ascii Switchers Coaxitron and Fixed Camera Transmission Looping Camera Outputs DX8000 and DX9000 Series DvrsConnecting a DVR Method Network Pelconet Transmission SystemsNetworkip Example 3 of a PelcoNet Configuration Sample VMX300-E System with the NVR300 NVR300 Network Video RecorderInstallation Parts ListUSER-SUPPLIED Parts Mounting Rack Mount InstallationFront View Rear View VMX300-E Connections VMX300-E Connections to the NetworkVMX300-E Keyboard and Mouse Right VGA Monitor Video Input Direct Serial Connection External DevicesInternet Protocol KBD300A Direct Serial Connection KBD300A KeyboardNetwork Keyboard Communications tab, Connection Type Select Direct Serial SPECTRA/ESPRIT Control ConnectionsConnect Ground on ONE END only CM6700 SwitcherCM6800 Port Programming CM6800 SwitcherAlternate CM6800 Connection CM9700 Matrix Switching Systems Alternate CM9700 Connection CM9760-ALM Alarm Interface Unit RDA RDB RS-422 Reversed Cable CM9760-REL Relay Interface UnitIP-BASED Devices Serial Output DevicePower Cables Appendix Changing the Port Settings of a VMX300-E COM PortELECTRICAL/ Video SpecificationsPage Product Warranty and Return Information ISO9001

VMX300-E specifications

The Pelco VMX300-E is a cutting-edge video management system that caters to the growing needs of modern security surveillance. Designed for scalability, flexibility, and performance, this system supports a vast range of applications, from small installations to large enterprise-level systems. One of its most impressive features is its user-friendly interface, which is intuitive and easy to navigate, allowing users to efficiently manage, view, and record high-definition video from a variety of sources.

One of the standout characteristics of the VMX300-E is its compatibility with numerous camera models and types, including IP and analog cameras. This vast compatibility ensures that users can integrate existing surveillance equipment into the new system seamlessly, maximizing their current investments in security technology. The system supports a wide resolution range, ensuring that users can capture high-quality video regardless of their needs or deployment environment.

Pelco has incorporated advanced technologies into the VMX300-E, including powerful video analytics capabilities. These analytics allow for real-time monitoring and alerting, enhancing situational awareness and enabling security personnel to respond quickly to incidents. Features such as motion detection, license plate recognition, and object tracking add significant value by automating surveillance processes and reducing the burden on operators.

Another key characteristic of the VMX300-E is its robust storage options. The system supports both local and cloud-based storage solutions, providing users with flexibility in how they manage and store their video footage. The ability to archive video for extended periods is crucial for compliance and investigative purposes, making the VMX300-E a reliable choice for organizations with strict security requirements.

Scalability is another fundamental aspect of the Pelco VMX300-E. The system can support a wide range of camera counts and integrates with various other security systems, including access control and intrusion detection systems. This level of integration ensures that businesses can adapt their security measures as they grow or change.

In summary, the Pelco VMX300-E stands out in the crowded video management system market due to its user-friendly interface, versatile compatibility, advanced analytics, and flexible storage options. Its scalability and integration capabilities make it a future-proof solution for businesses looking to enhance their security operations. Whether for retail, transportation, or critical infrastructure, the VMX300-E delivers exceptional performance that meets the demands of today’s security landscape.