Pelco EW5001 manual Network Settings Tab, Changing the Unit Mode

Page 10

Network Settings Tab

Use the Network Settings tab to manage network settings such as changing the unit mode and host name, turning on/off the Dynamic Host Configuration Protocol (DHCP), or setting a static IP address.

Figure 5. Network Settings Tab

CHANGING THE UNIT MODE

The unit mode you select should be based on the configuration determined during installation. Refer to Application Scenarios in the installation manual shipped with the EW5001 for more information.

To change the unit mode, do the following:

1.Open the Unit Mode drop-down box by clicking the down arrow.

2.Select a unit mode from the drop-down box.

3.The selected unit mode is now displayed in the Unit Mode box, as well as on the second tab.

10	C2684M (2/08)

Image 10

Contents Endura EW5001 Single Radio Wireless Device C2684M 2/08 Contents Setup Window Accessing the EW5001Using AN Endura Workstation WelcomeWS5000 Setup Window Using a WEB Browser Navigation Tools Navigation BarAccessing the Online Help Changing the Timeout SettingChanging the Password Canceling SettingsAccessing PELCO’S WEB Site Restoring DefaultsSaving the Settings Network Settings Tab Changing the Unit ModeManually Setting the IP Address Changing the Network SettingsChanging the Host Name Access Point Access Point or Wireless Bridge TabChanging the Ssid Changing the Encryption Passphrase Changing the Encryption TypeStatistics and Diagnostics Changing the ChannelWireless Bridge Changing the Connection SpeedChanging the Bridge Connection Settings Device Log Tab Troubleshooting Problem Possible Causes Suggested RemedyProduct Warranty and Return Information ISO9001

Related manuals

Manual 32 pages 42.26 Kb