SAVING THE SETTINGS
1.After testing the changed settings, the Save Settings button appears in place of the Test Settings button.
2.If the settings are correct, click the Save Settings button to apply changes.
3.If the changes are not correct, click the Cancel button to revert to the last saved settings.
RESTORING DEFAULTS
1.To restore Pelco’s original defaults to all settings on all tabs, click the Restore Defaults button. A dialog box appears.
NOTE: Restoring the device to the factory default settings will result in a loss of any configurations, including wireless and network settings, that were previously applied.
2.Click the OK button to continue restoring defaults.
3.The window refreshes, and the default settings appear.
ACCESSING PELCO’S WEB SITE
For your convenience, there is a hyperlink to the Pelco Web site in the bottom left of the window. Click the Pelco link to open www.pelco.com in a new window.
C2684M (2/08) | 9 |