CHANGING THE CHANNEL
If your network is experiencing excessive interference, the channel should be changed. When changing the channel, remember that all wireless devices on the network must be set to the same channel.
To change the channel, do the following:
1.Open the Channel
2.Select a channel from the
STATISTICS AND DIAGNOSTICS
The information in this section is for reference only, and will typically be used by Pelco Product Support in the event of video quality issues. This section provides information about the location of the device on the network, how the network connections are functioning, and which devices are connected.
To view all of the information available, open the
Network Information
The Network Information section is a reflection of the settings assigned on the Network Settings tab. Refer to Network Settings Tab on page 10 for more information on these settings.
Wireless Statistics and System Information
The information in these sections will be useful to Pelco Product Support for troubleshooting purposes. In the event of a video quality issue, have this information available when contacting Pelco for support.
Currently Connected Devices
This section provides the MAC address, speed, and RSSI for each of the devices connected to the EW5001.
14 | C2684M (2/08) |