Sun Microsystems Interface Adapter manual Edit the /etc/netmasks file as follows

Page 36

4.Add the client site hosts on the server machine and add the server site hosts on the client machine.

a.Edit the server’s /etc/hosts file and add the client site local hosts.

b.Edit the client’s /etc/hosts file and add the server site local hosts.

Note – Both IP addresses have to be on the same subnet.

Refer to the hosts(4) man page and the sample /etc/hosts files:

#Server site (/etc/hosts) #======================= #local

192.10.10.10qa8a-hihp0

193.10.10.10qa8a-hihp1

194.10.10.10qa8a-hihp2

195.10.10.10qa8a-hihp3

#remote

192.10.10.20qa1b-hihp0

193.10.10.20qa1b-hihp1

194.10.10.20qa1b-hihp2

195.10.10.20qa1b-hihp3

#Client site (/etc/hosts)

#=======================

#local

192.10.10.20 qa1b-hihp0 193.10.10.20 qa1b-hihp1 194.10.10.20 qa1b-hihp2 195.10.10.20 qa1b-hihp3

#remote

192.10.10.10qa8a-hihp0

193.10.10.10qa8a-hihp1

194.10.10.10qa8a-hihp2

195.10.10.10qa8a-hihp

5.Edit the /etc/netmasks file as follows:

192.10.10.0255.255.255.0

193.10.10.0255.255.255.0

194.10.10.0255.255.255.0

195.10.10.0255.255.255.0

6.Start the PPP connection by typing the following commands:

/etc/rc2.d/S47pppd stop /etc/rc2.d/S47pppd start

boot -r

16 Sun PCI High Speed Quad Port Serial Interface Adapter User’s Guide • December 2005

Image 36
Contents Sun Microsystems, Inc Please Recycle Contents Cable Pin Assignments & Signals SunVTS Diagnostic Testing Page Figures Page Tables Page Regulatory Compliance Statements FCC Class a NoticeICES-003 Class B Notice Avis NMB-003, Classe B CCC Class a Notice Page Declaration of Conformity Page Preface How This Book Is OrganizedUsing Unix Commands Shell PromptsTypographic Conventions Related DocumentationDocumentation, Support, and Training Third-Party Web SitesSun Welcomes Your Comments Product Overview Product DescriptionFeatures SunHSI/U AdapterHardware and Software Requirements 1Hardware and Software RequirementsPage SunHSI/U Adapter Installation Installation ProcessTo Install the Adapter External Cabling RS-232 to RS-449 Connections Page SunHSI PCI Software Installation Installation Overview1SunHSI PCI Software Directories and Files Before Installing the Software Verifying the Software and Hardware RequirementsTo Remove Older Versions of the Software Installing the Software To Install the SunHSI SoftwareAt the ok prompt, type the boot command with the -roption Configuring the Software To Test the InstallationTo Configure for Point-to-Point Protocol Edit the /etc/netmasks file as follows SunHSI Utilities Hsipinit UtilityT1 Compatibility Options Operating Modes OptionsHdlc Mode Hsiploop Utility Hsipstat Utility Page Cable Pin Assignments & Signals Pin AssignmentsDCD1A Appendix a Cable Pin Assignments & Signals RTS4A Interface Signals RS-449 Interface SignalsPage Null Modem Cable Requirements Configuring Internal or External Clocking Building the Null Modem CableRS-449 Signals RS-449 Null Modem CablePage Appendix B Null Modem Cable Requirements To RS-449 Converter Figure B-3X.21 to RS-449 ConverterT1 Inverted Data and Clock Signals Data Signal InversionBipolar with 8-Zero Substitution Hdlc Zero Insertion AlgorithmClock Signal Inversion Page SunVTS Diagnostic Testing Using the SunVTS sunlink TestPage Viewing the Man Pages Man PagesTo View Man Pages in the C Shell Environment To View Man Pages in Bourne or Korn Shell Environments Make the changes effective in your current windowGlossary Page Index