■“Fibre Channel Switch Support” on page 6
Host Platform Support
The NEM is supported by the platforms and operating systems (OSs) listed in TABLE
TABLE 1-3 Platform and Operating System Support
Platform | Supported OSs |
|
|
Sun Blade™ 8000 Modular System | Sun Solaris, Linux, and Windows |
Sun Blade 8000 P Modular System | Sun Solaris, Linux, and Windows |
|
|
You can install the NEM in an available NEM slot of the Sun Blade 8000 Chassis or Sun Blade 8000 P chassis.
For information about updating the ILOM firmware for the chassis monitoring module (CMM) or the service processor (SP) go to http://www.sun.com/servers/blades/8000/downloads.jsp. For firmware upgrade instructions, see Preparing to Upgrade the ILOM Firmware in the Sun Blade 8000 Series Online Information System.
Storage System Support
The NEM supports the following storage systems:
■Sun StorEdge™ 3510 and 3511 FC Arrays (see “Using the NEM With Sun StorEdge 3510 and 3511 Arrays” on page 29)
■Sun StorEdge 6020 and 6120 Arrays
■Sun StorEdge 6130 Array
■Sun StorageTek 6140 Array
■Sun StorageTek 6540 Array
■Sun StorageTek FlexLine™ 380 Storage System
■Sun StorEdge 6320 system
■Sun StorEdge L25 and L100 tape libraries with Fibre Channel / LVD Internal Bridge
■Sun StorEdge C4 tape library with LVD SCSI to Fibre Channel Card
■Sun StorEdge L500 tape library
■Sun StorEdge L180, L700 tape libraries
Chapter 1 Network Express Module Overview | 5 |