Paradyne BSX8000-5, Broadband Services Switch Unpacking and Inspecting the Equipment

Page 4

Unpacking and Inspecting the Equipment

HANDLING PRECAUTIONS FOR ! STATIC-SENSITIVE DEVICES

This product is designed to protect sensitive components from damage due to electrostatic discharge (ESD) during normal operation. When performing installation procedures, however, take proper static control precautions to prevent damage to equipment. If you are not sure of the proper static control precautions, contact your nearest sales or service representative.

If there is any visible damage, do not attempt to connect the device. Contact your sales or support representative

Installing a Micro Interface Module (MIM) in the BSX8000-5

A MIM provides the upstream network connection for the BLC. Any of Paradyne's available MIM models may be installed on the BSX8000-5 uplink module.

Procedure

1.Remove the cover plate from the MIM port.

CAUTION: Cover plates should be stored for possible future use. If a MIM is removed from a BSX8000-5, it must be replaced with either another MIM or a cover plate. Do not operate a BSX8000-5 with an open MIM port.

2.Carefully slide the faceplate of the MIM into the BSX8000-5 uplink module faceplate. Ensure that the mounting holes on the MIM are lined up with the BSX8000-5 uplink module.

3.Secure the MIM circuit board to the BSX8000-5 uplink module with the two thumbscrews.

4

March 2005

BSX8-A2-GZ40-10

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Contents Software and Firmware License AgreementPage Product Documentation Online BSX8000-5 OverviewRelease Notes Installing a Micro Interface Module MIM in the BSX8000-5 Unpacking and Inspecting the EquipmentInstalling the BSX8000-5 in a BLC Connect the MIM to the NetworkMIM-10/100 MIM-2000FWeb Interface NMS BLC ManagementMIM-4000F Configuring Your Windows PC to Communicate with NMS NMS home page appears NMS Management Configuration Parameter DescriptionCommand Line Interface CLI CLI System RequirementsConnecting a PC Directly CLI CommandsCLI Commands 1 Description Launching the Terminal Emulation ProgramCLI Commands 2 Description ClearnvramLED States and Meanings LED IndicatorsState Indication Additional Information 100/1000 Pinouts Signal 10/100/1000BaseT ConnectorsDB9 to RJ45 Adapter Pinouts Warranty, Sales, Service, and Training Information Regulatory Compliance for Class a EquipmentUS Federal Communications Commission FCC Industry Canada EuropeBSX8-A2-GZ40-10
Top Page Image Contents