Paradyne 6700-A2-GB22-00 manual Choosing Port Settings, Port Settings Dialog Box

Page 41

Custom Network Interface Settings

Choosing Port Settings

Use Port... to specify communications port settings for SLIP, CSLIP, or PPP interfaces.

!CAUTION:

Perform changes to port settings other than baud rate and connector settings with caution. Hardware flow control is the default setting due to binary communication requirements.

.Procedure

1.Choose Settings... from the Network menu. The Custom window appears, as shown in Figure 5-1.

2.Choose Setup from the Custom window menu bar.

3.Choose Port... from the Setup menu. The Port Settings dialog box appears, as shown in Figure 5-5.

Table 5-3 describes the fields on the Port Settings dialog box.

Figure 5-5. Port Settings Dialog Box

Issue 1 September 1994

5-7

Image 41

Contents AT&T Paradyne is amended to read Paradyne Corporation Paradyne All Rights Reserved Series Network Management SystemTrademarks This page intentionally left blank Issue 1 September Contents Snmp Settings Configuration Files and Interfaces Workstation SettingsSnmp Settings Custom Network Interface SettingsTables Custom Nework Interface SettingsRelated Documents PrefaceOrdering Information Overview What is the Network Configuration Feature?Preparing for Network Configuration Optional Network Configuration Main Menu Accessing the Network Configuration FeatureMain Menu Options Network Configuration Main Menu OptionsWorkstation Settings Adding Names and IP Addresses ProcedureDesignating NMS Server Names IP Addresses Modifying or Deleting Names and IP Addresses Active Server Dialog Box Choosing the Active ServerStation Administration Dialog Box Entering Administrative DataConfiguration Files and Interfaces Exiting a Configuration File Configuration FilesSaving a Configuration File Adding an Interface InterfacesInterface Name Dialog Box Duplicating an InterfaceDelete Interface Dialog Box Deleting an InterfaceAuto Connect Interfaces Dialog Box Automatically Connecting InterfacesPage Snmp Settings Uses Configuring Snmp Community NamesCommunity Names Dialog Box Choose OK. The Main Menu appears 4Issue 1 September Adding Authorized Manager Information Procedure Configuring Authorized Snmp ManagersPage Snmp Settings Custom Network Interface Settings Custom Window Fields 1 Viewing Network SettingsCustom Window Fields 2 Configuring LAN Hardware ParametersHardware Dialog Box Fields Description Hardware Dialog BoxInternet Address Dialog Box Selecting the IP Address of a WorkstationSubnet Mask Dialog Box Setting the Number of Subnet Mask BitsPort Settings Dialog Box Choosing Port SettingsPort Settings Dialog Box Fields Description Modem Settings Dialog Box Choosing Modem SettingsModem Settings Dialog Box Fields Description Dial Settings Dialog Box Specifying Dial SettingsDial Settings Dialog Box Fields Description Designating the Default GatewayAgent GlossaryAddress mask Baud BackupBuffer ClientDial-up DaemonDevice name DomainEIA DSUFile server File accessGateway Group idHost table HostIcmp InternetLAN IP addressLog Log outMIB ManagerNdis Network addressNFS NewtNIC PingRFC RAMSMI SlipSnmp STDTftp TCPTCP/IP User name Token ringUser id Index