Paradyne 6700-A2-GB22-00 manual Choosing Modem Settings, Modem Settings Dialog Box

Page 43

Custom Network Interface Settings

Choosing Modem Settings

Use Modem... to specify modem interaction commands and modes for SLIP interfaces.

.Procedure

1.Choose Settings... from the Network menu. The Custom window appears, as shown in Figure 5-1.

2.Choose Setup from the Custom window menu bar.

3.Choose Modem... from the Setup menu. The Modem Settings dialog box appears, as shown in Figure 5-6.

Table 5-4 describes the fields on the Modem Settings dialog box.

Figure 5-6. Modem Settings Dialog Box

4.Select the appropriate modem from those listed under Modem Defaults. The Network Configuration feature then uses default commands based on your choice.

If your modem is not listed, select Hayesr which works across almost all modem types. Select None to indicate a direct null-modem connection, which does not require any dial.

Issue 1 September 1994

5-9

Image 43

Contents AT&T Paradyne is amended to read Paradyne Corporation Paradyne All Rights Reserved Series Network Management SystemTrademarks This page intentionally left blank Issue 1 September Contents Snmp Settings Custom Network Interface Settings Workstation SettingsConfiguration Files and Interfaces Snmp SettingsTables Custom Nework Interface SettingsRelated Documents PrefaceOrdering Information Preparing for Network Configuration What is the Network Configuration Feature?Overview Optional Network Configuration Main Menu Accessing the Network Configuration FeatureMain Menu Options Network Configuration Main Menu OptionsWorkstation Settings Designating NMS Server Names IP Addresses ProcedureAdding Names and IP Addresses Modifying or Deleting Names and IP Addresses Active Server Dialog Box Choosing the Active ServerStation Administration Dialog Box Entering Administrative DataConfiguration Files and Interfaces Saving a Configuration File Configuration FilesExiting a Configuration File Adding an Interface InterfacesInterface Name Dialog Box Duplicating an InterfaceDelete Interface Dialog Box Deleting an InterfaceAuto Connect Interfaces Dialog Box Automatically Connecting InterfacesPage Snmp Settings Uses Configuring Snmp Community NamesCommunity Names Dialog Box Choose OK. The Main Menu appears 4Issue 1 September Adding Authorized Manager Information Procedure Configuring Authorized Snmp ManagersPage Snmp Settings Custom Network Interface Settings Custom Window Fields 1 Viewing Network SettingsCustom Window Fields 2 Configuring LAN Hardware ParametersHardware Dialog Box Fields Description Hardware Dialog BoxInternet Address Dialog Box Selecting the IP Address of a WorkstationSubnet Mask Dialog Box Setting the Number of Subnet Mask BitsPort Settings Dialog Box Choosing Port SettingsPort Settings Dialog Box Fields Description Modem Settings Dialog Box Choosing Modem SettingsModem Settings Dialog Box Fields Description Dial Settings Dialog Box Specifying Dial SettingsDial Settings Dialog Box Fields Description Designating the Default GatewayAddress mask GlossaryAgent Client BackupBaud BufferDomain DaemonDial-up Device nameEIA DSUGroup id File accessFile server GatewayInternet HostHost table IcmpLog out IP addressLAN LogNetwork address ManagerMIB NdisPing NewtNFS NICRFC RAMSTD SlipSMI SnmpTCP/IP TCPTftp User id Token ringUser name Index