Paradyne 9123, and 9820-45M Shdsl Network Interface, Shdsl Network Physical Interface Options 1

Page 59

3. Configuration Options

SHDSL Network Interface

The FrameSaver DSL 9788 CSU/DSU and Router have an SHDSL network interface.

Table 3-12. SHDSL Network Physical Interface Options (1 of 2)

Line Rate Mode

Possible Settings: AutoRate, Fixed

Default Setting: AutoRate

Specifies the mode to be used for rate selection.

AutoRate – The unit automatically detects the line rate from the network interface.

Fixed – The unit uses the line rate specified by DSL Line Rate.

DSL Line Rate (Kbps)

Possible Settings:

–If PSD Mask is Symmetric: 200, 264, 328, 392, 456, 520, 584, 648, 712, 776, 784, 840, 904, 968, 1032, 1096, 1160, 1224, 1288, 1352, 1416, 1480, 1544, 1552, 1608, 1672, 1736, 1800, 1864, 1928, 1992, 2056, 2120, 2184, 2248, 2312

–If PSD Mask is Asymmetric (available in future release) and Region is Annex A:

776, 784, 1544, 1552

–If PSD Mask is Asymmetric (available in future release) and Region is Annex B:

2056, 2312

Default Setting: [Depends on settings of Line Rate Mode, PSD Mask, and Region]

Determines the rate on the DSL network interface. Valid rates, and the rates presented on the screen, depend on the values of Region and PSD Mask. If a change to another configuration option renders the selected DSL Line Rate invalid, the Line Rate Mode is set to AutoRate.

Display Conditions – DSL Line Rate does not appear if DSL Line Rate Mode is set to

AutoRate.

200 – 2312 – The DSL line rate is set to the specified rate in Kbps.

Region

Possible Settings: Annex A, Annex B

Default Setting: [Depends on model]

Determines the annex of the G.991.2 recommendation that the unit will conform to. The value of Region in part determines what DSL Line Rates are available. If a change in the Region renders the current DSL Line Rate invalid, the Line Rate Mode is set to AutoRate.

Annex A – The unit conforms to Annex A (for North America).

Annex B – The unit conforms to Annex B (for Europe).

9000-A2-GB31-00

December 2002

3-27

Page 58 Page 60
Image 59
Page 58 Page 60
Contents FrameSaver SLV Copyright 2002 Paradyne Corporation All rights reserved Contents Contents Index Feature-Specific ConfigurationContents December Section Description Purpose and Intended AudienceDocument Organization Other FrameSaver model-specific documentation includes Product-Related DocumentsDocument Number Document Title FrameSaver SLV reference library containsVii Conventions Used Convention Used When UsedConfiguration Procedures Configuration Menu Example Configuration MenuConfiguration Option Area Description Configuration Option AreasMain Menu→ Configuration Accessing and Displaying Configuration OptionsConfiguration→PVC Connections Changing Configuration OptionsSaving Configuration Options Basic Configuration Main Menu→ Easy Install Using the Easy Install FeatureEasy Install Screen Example DDS Interface Service Type Possible Settings Frame Relay, Leased Line, PPP Easy Install Configuration Options 1Dslam Easy Install Configuration Options 2Time Slot Assignment Screen 9123, 9126 Easy Install Configuration Options 3Create a Dedicated Network Management Link Ethernet Management Options ScreenNetwork 1 Line Build Out 9520, 9520-ILM Easy Install Configuration Options 4Network 1 Line Framing Format 9123, 9126 Network 1 Line Coding Format 9123, 9126Network 1 Port Type 9820-2M, 9820-8M Easy Install Configuration Options 5Network 1 DSL Line Rate Mode 9720, 9783 DS0 Base Rate 9123, 9126784 Easy Install Configuration Options 6Network 1 DSL Line Rate 384Network 1 Channel Easy Install Configuration Options 7Configuration→Data Ports→DLCI Records Using RIP with FrameSaver SLV CSU/DSUsIf the selection is Enter Entering System Information and Setting the System ClockMain Menu→ Control→System Information Main Menu→ Auto-Configuration Setting Up Auto-ConfigurationDiscovery Mode Configuration Description Selecting a Frame Relay Discovery ModeMain Menu→ Auto-Configuration→Frame Relay Discovery Mode Takes place Automatically Removing a Circuit Configuration Option Tables Configuration OptionsConfiguration Options System Frame Relay and LMI Options 1 Configuring the Overall SystemConfiguring Frame Relay and LMI for the System CSU/DSUs Main Menu→ Configuration→System →Frame Relay and LMISystem Frame Relay and LMI Options 2 System Frame Relay and LMI Options 3 System Frame Relay and LMI Options 4 LMI Status Enquiry N1 Possible Settings 1, 2, 3, 4LMI Heartbeat T1 Possible Settings 5, 10, 15, 20, 25 PPP Options Configuring PPP OptionsMain Menu→ Configuration→System→PPP Possible Settings Independent, Port-1FollowsNetField Setting After RfcCodePoints Selected Configuring Class of Service DefinitionsCode Points Assigned Class of Service DefinitionsClass of Svc Name Measure Latency & AvailabilityName Code Point DefinitionsCode Point Definitions Code PntSLV Type Available Settings Standard, COS 1-COS Configuring Service Level Verification OptionsMain Menu→ Configuration→System→Service Level Verification Service Level Verification Options 1SLV Timeout Clearing Event Threshold Service Level Verification Options 2Dlci Down on SLV Timeout SLV Timeout Error Event ThresholdSLV Packet Size bytes Service Level Verification Options 3SLV Latency Clearing Event Threshold General System Options 1 Configuring General System OptionsMain Menu→ Configuration→System→General Test TimeoutGeneral System Options 2 General System Options 3 System Alarm RelayMain Menu→ Configuration→Network→Physical Configuring Physical InterfacesConfiguring the Network Interface T1 Network Physical Interface Options 1 T1 Network InterfaceNetwork Initiated PLB T1 Network Physical Interface Options 2Transmit Timing Network Initiated LLBESF Network Initiated Dclb Possible Settings Disable, V.54&ANSIT1 Network Physical Interface Options 3 Ansi Performance Report MessagesCircuit Identifier T1 Network Physical Interface Options 4Line Build Out T3 Network InterfaceT3 Network Physical Interface Options DDS Network Physical Interface Options 1 DDS Network InterfaceRequire DSU Latching Loopback Preamble DDS Network Physical Interface Options 2DSU Latching Loopback Channel Operating Rate Possible Settings AutoRate, 64, 128Idsl Network Interface 10. Idsl Network Physical Interface OptionsDSL Line Rate Kbps Line Rate Mode Possible Settings Hunt, AutoRate, FixedSdsl Network Interface 11. Sdsl Network Physical Interface Options12. Shdsl Network Physical Interface Options 1 Shdsl Network InterfacePort Type Synchronous Network Interface12. Shdsl Network Physical Interface Options 2 PSD MaskMonitor Rlsd Monitor DSRMonitor CTS 14. Hssi Network Data Port Physical Interface Options Hssi Network Interface15. V.35 Data Port Physical Interface Options 1 Configuring a User Data Port CSU/DSUsMain Menu→ Configuration→Data Ports→Physical Data Port Physical InterfacePort Base Rate Port Use Possible Settings Frame Relay, Synchronous Data15. V.35 Data Port Physical Interface Options 2 Max Port RateMonitor RTS 15. V.35 Data Port Physical Interface Options 3Transmit Clock Source Port DTE Initiated Loopbacks 15. V.35 Data Port Physical Interface Options 4Monitor DTR Invert Transmit and Receive Data Action on Network Yellow Alarm15. V.35 Data Port Physical Interface Options 5 15. V.35 Data Port Physical Interface Options 6 EIA-530-A/X.21/V.35 Data Port Physical InterfaceTransmit Clock Source 17. Hssi Data Port Physical Interface Options 1 Hssi Data Port Physical Interface17. Hssi Data Port Physical Interface Options 2 17. Hssi Data Port Physical Interface Options 3 18. T3 User Port Physical Interface Options Configuring the T3 User Port 9520-ILMMain Menu→ Configuration→T3 User Ports→ Physical Interface Status Configuring the DSX-1 Interface 9126Main Menu→ Configuration→DSX-1 19. DSX-1 Physical Interface Options 1Send All Ones on DSX-1 Failure 19. DSX-1 Physical Interface Options 220. Isdn BRI DBM Physical Interface Options 9126 Configuring the Isdn DBM Interface 9126, 9128Main Menu→ Configuration→ISDN→Physical Service Profile ID Spid 1 orLocal Phone Number Switch Type Possible Settings NI-2, ATT4ESS, ATT5ESS21. Isdn PRI DBM Physical Interface Options 9128 1 21. Isdn PRI DBM Physical Interface Options 9128 2 Line Build Out LBO Possible Settings 0.0, -7.5, -1521. Isdn PRI DBM Physical Interface Options 9128 3 Link Name Setting Up Isdn Link Profiles 9126, 9128Main Menu→ Configuration→ISDN→ISDN Link Profiles 22. Isdn Link Profile Options 1Maximum Link Rate Kbps 22. Isdn Link Profile Options 2Outbound Phone Number Inbound Calling ID 1 orAlternate Outbound Phone Number Assigning Time Slots/Cross Connections22. Isdn Link Profile Options 3 Caller Identification MethodPPP Assigning Time Slots to the Network InterfaceValue Meaning Assigning DSX-1 Time Slots to the Network Interface DSX-1 to Network Time Slot Assignment Screen Example DSX-1 Signaling Assignments and Trunk Conditioning RBS Idle PLAR3idle Synchronous Data Port Assignment Screen Example Clearing Assignments LMI Configuring Frame Relay for an Interface24. Interface Frame Relay Options 1 Frame Relay DS0s Base Rate 24. Interface Frame Relay Options 2Traffic Policing LMI Parameters24. Interface Frame Relay Options 3 25. Interface PPP Options Configuring PPP for an InterfaceMain Menu→ Configuration→Network/Data Ports → PPP Dlci Number Manually Configuring Dlci Records26. Dlci Record Options 1 CIR bps 26. Dlci Record Options 2Excess Burst Size Bits 26. Dlci Record Options 3Committed Burst Size Bc Bits Outbound Management Priority Backup Group Possible Settings A, B, C, . . . Z, None26. Dlci Record Options 4 Dlci PriorityVPI,VCI Number Configuring Circuit Records for the Network InterfaceMain Menu →Configuration →Network →Circuit Records 27. Circuit Records Options 19783 0 9788 0 27. Circuit Records Options 29783 9788 27. Circuit Records Options 3Excess Burst Size Be Bits 28. Network ATM Options Configuring ATM for the Network InterfaceMain Menu→ Configuration→Network →ATM Cell Delineation Error Event ThresholdSource Dlci Configuring PVC ConnectionsMain Menu→ Configuration→PVC Connections 29. PVC Connection Options 1Primary Destination Dlci 29. PVC Connection Options 2Source Edlci Primary Destination LinkAlternate Destination Dlci 29. PVC Connection Options 3Primary Destination Edlci Alternate Destination LinkAlternate Destination Edlci 29. PVC Connection Options 430. IP Path List Configuring the IP Path ListMain Menu→ Configuration→IP Path List Static Setting Up Management and Communication Options 31. Node IP Options 1 Configuring Node IP Information31. Node IP Options 2 Management MTU Size TS Access Management Link31. Node IP Options 3 TS Management Snmp Validation 31. Node IP Options 432. Management PVC Options 1 Configuring Management PVCsSet DE 32. Management PVC Options 2Payload Managed Primary Dlci 32. Management PVC Options 3Primary Edlci 32. Management PVC Options 4Alternate Edlci 32. Management PVC Options 5Alternate Dlci Encapsulation 32. Management PVC Options 6Snmp Management Configuring General Snmp ManagementName 1 Access 33. General Snmp Management Options 133. General Snmp Management Options 2 Configuring Telnet and/or FTP Session SupportName 2 Access Telnet Session Telnet Login Required34. Telnet and FTP Session Options 1 34. Telnet and FTP Session Options 2 Number of Managers Configuring Snmp NMS Security35. Snmp NMS Security Options 1 NMS IP Validation36. Snmp Traps and Trap Dial-Out Options 1 Configuring Snmp Traps and Trap Dial-Out35. Snmp NMS Security Options 2 Link see -38, Communication Port Options 36. Snmp Traps and Trap Dial-Out Options 2Enterprise Specific Traps Link Traps Possible Settings Disable, Up, Down, Both36. Snmp Traps and Trap Dial-Out Options 3 Rmon Traps Possible Settings Network, Ports, DBM, All, None36. Snmp Traps and Trap Dial-Out Options 4 Dlci Traps on Interfaces Filter Selection FieldTrap Disconnect Dial-Out Delay TIme Min36. Snmp Traps and Trap Dial-Out Options 5 Trap Dial-OutIP SLV Availability Traps 36. Snmp Traps and Trap Dial-Out Options 6Alternate Dial-Out Directory Latency Traps37. Ethernet Management Options 1 Configuring Ethernet ManagementProxy ARP 37. Ethernet Management Options 2Character Length Configuring the Communication Port38. Communication Port Options 1 Stop Bits Login Required38. Communication Port Options 2 Parity38. Communication Port Options 3 103RIP 38. Communication Port Options 439. Modem Port Options 1 Configuring the Modem Port38. Communication Port Options 5 39. Modem Port Options 2 10639. Modem Port Options 3 10739. Modem Port Options 4 40. Auto Backup Criteria Options 1 Configuring the Criteria for Automatic BackupMain Menu→ Configuration→Auto Backup Criteria Backup Allowed Day To nnnn 40. Auto Backup Criteria Options 2When Auto Backup Allowed Backup Allowed Day From nnnnFeature-Specific Configuration AT Command String To configure the modem to Setting Up an External ModemValid characters include For Setting Up an Internal ModemSetting Up Call Directories for Trap Dial-Out Main Menu→Control→Modem Call DirectoriesSetting Up to Use the Modem PassThru Feature Main Menu→Configuration→ISDN→Physical Setting Up Dial BackupSetting Up the DBM Physical Interface If you select Then Setting Up Automatic Backup ConfigurationConnections? PVC Connections? Following prompt When Appears If you selectCriteria for Automatic Backup in , Configuration Options Modifying Isdn Link Profiles Main Menu→Configuration→ISDN→Link ProfilesFor Originating a Backup Call For Answering a Backup Call Main Menu→Configuration→Auto-Backup Criteria Restricting Automatic Backup and Configuring Backup TimersAssigning DLCIs to a Backup Group Configuring the DBM Interface to Send Snmp TrapsMain Menu→Control→Change Operating Mode PVC Backup Over the Network InterfaceSetting Up Back-to-Back Operation Changing Operating ModeFeature-Specific Configuration 9000-A2-GB31-00 December Feature-Specific Configuration December ATM ARPRTS DBMDTR RlsdIdsl DTEEIR DSLHssi IP SLVIsdn IN-5 NMS IN-6SLV Snmp NMSIP Slip PVCIN-8 IN-9 IN-10
Related manuals
Manual 271 pages 14.3 Kb Manual 278 pages 35.32 Kb Manual 28 pages 41.96 Kb Manual 233 pages 22.17 Kb Manual 340 pages 17.41 Kb

and 9820-45M, 9123, 9623, 9783, 9720 specifications

The Paradyne 9820-8M, 9788, 9128 standalone, 9128 carrier-mount, and 9820-2M are critical components in telecommunications networks, designed to enhance data transmission and improve connectivity. Each model offers unique features and capabilities that cater to various requirements in both enterprise and service provider environments.

The Paradyne 9820-8M is a multi-service access platform that provides high-speed connectivity for voice, video, and data transmission. It supports multiple protocols, enabling seamless integration into existing infrastructures. Key features include a modular design that allows for scalability and easy upgrades, ensuring that organizations can adapt to evolving demands. Its advanced error correction and QoS (Quality of Service) features ensure reliable performance, even in challenging network conditions.

The Paradyne 9788 serves as a versatile platform for both digital and analog communications. It excels in the delivery of broadband services, supporting T1/E1 lines and providing robust mechanisms for data transmission. This model emphasizes redundancy and resilience, with built-in protection switching capabilities that maintain service continuity during faults or maintenance activities. Its compact design makes it an ideal solution for environments with space constraints.

The 9128 standalone model is aimed at customers requiring an easy-to-deploy solution for point-to-point connections. This model offers critical features such as an intuitive user interface, comprehensive diagnostics, and monitoring capabilities that facilitate system management. It also supports diverse network topologies, making it suitable for various deployment scenarios.

In contrast, the 9128 carrier-mount version is engineered for organizations needing to manage multiple connections within a central office or remote site. This model is specifically designed to be mounted in standard telecom racks, optimizing space utilization while maintaining high performance. Its robust hardware allows for excellent thermal management and environmental resilience.

Lastly, the Paradyne 9820-2M combines versatility with high-performance capabilities, making it a reliable choice for service providers. It features dual-channel support, enabling simultaneous transmission and providing a cost-effective solution for high-capacity data needs. With enhanced security features, including encryption capabilities, the 9820-2M ensures that sensitive information transmitted across networks is protected against unauthorized access.

Collectively, these Paradyne models exemplify advanced telecommunications technology, offering scalability, resilience, and high performance. Their diverse features cater to the unique demands of various users, from enterprise networks to service providers, facilitating the continual evolution of communication technologies.
Top Page Image Contents