Quatech DS-100 user manual Windows 2000 Configuration, Using the Add New Hardware Wizard

Page 10

3. Windows 2000 Configuration

Windows 2000 maintains a registry of all known hardware installed in the computer. Inside the hardware registry Windows 2000 keeps track of all of the system resources, such as I/O locations, IRQ levels, and DMA channels. The “Add New Hardware Wizard” utility in Windows is designed to add new hardware and update this registry.

Windows 2000 will not automatically configure the DS-100. The user is required to manually configure Windows 2000 to match the resources set on the card.

3.1 Using the Add New Hardware Wizard

The following instructions provide a step-by-step instructions on installing the DS-100 Enhanced Serial Adapter in Windows 2000 using the “Add New Hardware” wizard.

1. Select Start>Settings>Controll Panel.

3-1	Quatech Inc.

Image 10

Contents DS-100 Warranty Information Quatech Inc Declaration of Conformity Table of Contents General Information This Page Intentionally Left Blank Installation Port Address IRQ EnabledDiagram of DS-100 Quatech Inc Windows 2000 Configuration Using the Add New Hardware WizardDouble click on the Add New Hardware icon Quatech Inc Page Quatech Inc Quatech Inc Quatech Inc Next select Ports COM & LPT, click Next Quatech Inc Page Page Page Page Page Page Page Windows 95 Configuration Page Viewing and Changing Resources with Device Manager Windows 95 Device Manager Quatech Inc Page This Page Intentionally Left Blank Setting the address Addressing PortsSerial 0 uses SW1 and SW2 Serial 1 uses SW3 and SW4 Enabling or disabling ports Interrupt Level IRQ Interrupt level IRQ selection Quatech IncInterrupt Sharing External Connections J5 -- Serial J6 -- Serial DS-100 connector definitions for EIA/TIA-232-E This Page Intentionally Left Blank Specifications Baud RatesTemperature Troubleshooting Computer will not boot upDS-100 Revision March