Quatech DS-100 user manual Quatech Inc

Page 3

© 2001, Quatech, Inc.

NOTICE

The information contained in this document cannot be reproduced in any form without the written consent of Quatech, Inc. Likewise, any software programs that might accompany this document can be used only in accordance with any license agreement(s) between the purchaser and Quatech, Inc. Quatech, Inc. reserves the right to change this documentation or the product to which it refers at any time and without notice.

The authors have taken due care in the preparation of this document and every attempt has been made to ensure its accuracy and completeness. In no event will Quatech, Inc. be liable for damages of any kind, incidental or consequential, in regard to or arising out of the performance or form of the materials presented in this document or any software programs that might accompany this document.

Quatech, Inc. encourages feedback about this document. Please send any written comments to the Technical Support department at the address listed on the cover page of this document.

IBM PCTM, PC-ATTM, PS/2™, and Micro Channel™ are trademarks of International Business Machines Corporation.

ii

Quatech Inc.

Image 3
Contents DS-100 Warranty Information Quatech Inc Declaration of Conformity Table of Contents General Information This Page Intentionally Left Blank Port Address IRQ Enabled InstallationDiagram of DS-100 Quatech Inc Using the Add New Hardware Wizard Windows 2000 ConfigurationDouble click on the Add New Hardware icon Quatech Inc Page Quatech Inc Quatech Inc Quatech Inc Next select Ports COM & LPT, click Next Quatech Inc Page Page Page Page Page Page Page Windows 95 Configuration Page Viewing and Changing Resources with Device Manager Windows 95 Device Manager Quatech Inc Page This Page Intentionally Left Blank Addressing Ports Setting the addressSerial 0 uses SW1 and SW2 Serial 1 uses SW3 and SW4 Enabling or disabling ports Interrupt level IRQ selection Quatech Inc Interrupt Level IRQInterrupt Sharing External Connections J5 -- Serial J6 -- Serial DS-100 connector definitions for EIA/TIA-232-E This Page Intentionally Left Blank Baud Rates SpecificationsTemperature Computer will not boot up TroubleshootingDS-100 Revision March