Quatech DS-100 user manual

Page 19

10.The “Input Request” (IRQ) must be set to corresponds with the jumpers setting on the DS-100 board.

3-10	Quatech Inc.

Image 19

Contents DS-100 Warranty Information Quatech Inc Declaration of Conformity Table of Contents General Information This Page Intentionally Left Blank Port Address IRQ Enabled InstallationDiagram of DS-100 Quatech Inc Using the Add New Hardware Wizard Windows 2000 ConfigurationDouble click on the Add New Hardware icon Quatech Inc Page Quatech Inc Quatech Inc Quatech Inc Next select Ports COM & LPT, click Next Quatech Inc Page Page Page Page Page Page Page Windows 95 Configuration Page Viewing and Changing Resources with Device Manager Windows 95 Device Manager Quatech Inc Page This Page Intentionally Left Blank Addressing Ports Setting the addressSerial 0 uses SW1 and SW2 Serial 1 uses SW3 and SW4 Enabling or disabling ports Interrupt level IRQ selection Quatech Inc Interrupt Level IRQInterrupt Sharing External Connections J5 -- Serial J6 -- Serial DS-100 connector definitions for EIA/TIA-232-E This Page Intentionally Left Blank Baud Rates SpecificationsTemperature Computer will not boot up TroubleshootingDS-100 Revision March