Quatech DS-100 user manual Interrupt Level IRQ, Interrupt level IRQ selection Quatech Inc

6. Interrupt Level (IRQ)

The DS-100 allows the use of any interrupt level in the range IRQ2 to IRQ7, IRQ10 to IRQ12, IRQ14, or IRQ15, selected using jumper block J3 (for Serial 0) or J4 (for Serial 1). In Figure 9, the factory default settings for Serial 0 and Serial 1 are shown. To select a different IRQ, move the jumper to the appropriate position on J3 or J4.

	IRQ2	IRQ3	IRQ4	IRQ5	IRQ6	IRQ7	IRQ10	IRQ11	IRQ12	IRQ14	IRQ15
Serial 0	12	13	14	15	16	17	18	19	20	21	22
J3
Default is IRQ 4	1	2	3	4	5	6	7	8	9	10	11
	IRQ2	IRQ3	IRQ4	IRQ5	IRQ6	IRQ7	IRQ10	IRQ11	IRQ12	IRQ14	IRQ15
Serial 1	12	13	14	15	16	17	18	19	20	21	22
J4
Default is IRQ 3
	1	2	3	4	5	6	7	8	9	10	11

Figure 9 --- Interrupt level (IRQ) selection

5-1 Quatech Inc.