Service, Tel Email support@patton.com | Patton electronic 1094A

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at:

Tel: (301)975-1007

Email: support@patton.com

www:http://www.patton.com

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 1094A. Technical Service hours: 8AM to 5PM EST, Monday through Friday.

IMPORTANT: The Model 1094A is equipped with flash upgrade. Please refer to Patton website, http://www.patton.com or contact Technical Support for the latest version of the soft- ware.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant- ed for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to con- tact Patton Electronics Technical Support at (301) 975-1007.

2.1 FEATURES

•DSL Distances on just two wires using HDSL technology

•DTE Speeds n x 64 to 1.152 Mbps

•2-wire Operation

•Standalone (QuikConnect™) and Rackmount Versions Available

•SNMP Network Management with In-Band Management of Remote Units plus Advanced Diagnostics & Statistics using Patton Model 1000MC

•Internal, external or receive recovered clocking options

•LED indicators for TD, RD, CTS, CD, DTR, TM, ER and NS

2.2 DESCRIPTION

The Patton Electronics NetLinkTM HDSL Multi-Rate DSL Modem provides high speed 2-wire connectivity to ISPs, PTTs, and corpora- tions using HDSL (Multi-rate Digital Subscriber Line) technology. Multi-rate DSL offers the ability to deliver the maximum bit rate that a twisted pair line can accommodate. Supporting multiple line rates from 144kbps to1.168 Mbps, the NetLink provides “megabyte” speeds to leased line, LAN to LAN interconnection, and WAN access networks over 2.9 miles/4.7km (1.152Mbps on 24AWG/.5mm wire).

The NetLinkTM HDSL standalone allows DTE speeds from 64kbps to 1.152Mbps in increments of 64kbps. Features include loop- back diagnostics, inband SNMP/HTTP remote management capabili- ties and externally accessible configuration switches. A high density 2U-high rack card version of the NetLinkTM HDSL is also available.

As a symmetric DSL NTU, NetLinkTM HDSL offers the same data rates in both directions over a single pair of regular telephone lines using 2B1Q modulation. Featuring replaceable DCE-DTE interface modules, the NetLink HDSL can be configured for a huge range of V.24/RS-232, V.35, RS-422/530, G.703 and X.21 applications. Line connection is made by an RJ-45 jack. The standard Model 1094A is powered by a 100/230VAC(Universal) supply. The DC power supply option supports any DC input between 40-60VDC.