Patton electronic Power-Down, Appendix a Patton Electroniics Model 1065 Specifications

5.5 POWER-DOWN

Turn off the Model 1065 Series by simply unplugging the AC power cord from the wall. There is no power switch.

APPENDIX A

PATTON ELECTRONIICS MODEL 1065 SPECIFICATIONS

Transmission Format:	Synchronous or asynchronous, 2-
	wire/half duplex, or 4-wire/full or half
	duplex
Interface:	RS-232 (CCITT V.24) connection via
	DB-25 female; twisted pair connection
	via RJ-45
Transmission Line:	2 or 4-wire UTP, 19 - 26 AWG
Data Rates:	Model 1065 - Synchronous or
	asynchronous at 1.2, 1.8, 2.4, 3.6, 4.8,
	7.2, 9.6, 14.4, 19.2, 28.8, 38.4, 57.6 and
	64 kbps—switch selectable;
Clocking:	Internal, external or receive recover
Controls:	Carrier constantly “ON” or “controlled by
	RTS”; RTS/CTS delay set to no
	delay, 7 or 53 ms
Applications:	Point-to-point or multi-point
Indicators:	Mono-color LED indicators for TD, RD,
	RTS & DCD; single LED indicators for
	Power, Test, and Error
RTS Anti-stream Timer	12.5 sec., 50 sec., or disabled (switch
	selectable); tolerance: +50%, -0
Diagnostics:	V.52 compliant bit error rate pattern
	(511/511E pattern) generator and
	detector with error injection mode;
	V.54 compliant—Local Analog Loopback
	and Remote Digital Loopback, activated
	by front panel switch or via RS-232
	interface
Transformer Isolation:	2000 V RMS
Surge Protection:	Immune to IEC-801-5 Level 2, 1kV
Temperature:	-10°C to 70°C
Humidity:	100% condensing from -10°C to +30°C
	Absolute humidity from +30°C to +70°C
Dimensions:	5.5” (W) X 7.5” (D) X 1.6” (H)
	(13.9 cm X 19 cm X 4 cm)
Power Supply:	157-242 VAC Universal Interface

21 22