4.0 OPERATION
Once the Model 1058s are properly installed, they should operate trans- parently. No user settings required. This section describes reading the LED status monitors.
4.1 POWER UP
Before applying power to the Model 1058, please review section 3.6, “Connecting Power” on page 13 to verify that the unit is connected to the appropriate power source.
4.2 FRONT PANEL LED STATUS MONITORS
The Model 1058 features five front panel LEDs that monitor power, the Ethernet signals, and the VDSL connection. Figure 10 (standalone ver- sion) and Figure 11 on page 15 (rack card version) show the front panel location of each LED. Table 1 on page 15 describes the LED functions.
Modem
VLINK
Ethernet
VLINK | Link |
QOL |
|
Link
Activity
Ethernet Activity LED
Power
Ethernet
Link LED
VDSL
Power QOL LED
LED
VLINK LED
Figure 10. Model 1058 standalone unit front panel
14