Patton electronic 1058 user manual Warranty Information, Radio and TV Interference, CE Notice

Page 3

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 1058 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of the shipment.

This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not performs as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics spe- cifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.

Note Conformity documents of all Patton products can be viewed online at www.patton.com under the appropriate product page.

1.1 RADIO AND TV INTERFERENCE

The Model 1058 generates and uses radio frequency energy, and if not installed and used properly-that is, in strict accordance with the manufac- turer’s instructions-may cause interference to radio and television recep- tion. The Model 1058 has been tested and found to comply with the limits for a Class A computing device in accordance with specifications in Sub- part B of Part 15 of FCC rules, which are designed to provide reasonable protection from such interference in a commercial installation. However, there is no guarantee that interference will not occur in a particular instal- lation. If the Model 1058 does cause interference to radio or television reception, which can be determined by disconnecting the unit, the user is encouraged to try to correct the interference by one or more of the follow- ing measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equip- ment into a different AC outlet (such that the computing equipment and receiver are on different branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). A Cer- tificate of Compliance is available by contacting Technical Support.

3

Image 3
Contents User Manual General Information Warranty InformationInstallation SpecificationsWarranty Information Radio and TV InterferenceCE Notice Page Tel +1 301 Email support@patton.com Industry Canada Notice ServiceFeatures General InformationDescription Typical application 1058DV InstallationStandalone Unit Installation Rack Card Installation1058DVRC 1058DRC VlinkModel 1058 RJ-45 twisted pair line interface Connecting the TWISTED-PAIR Line InterfaceConnecting the 10/100Base-T Ethernet Port to a Hub Connecting the 10/100BASE-T Ethernet Interface1058 10/100Base-T Port 10/100Base-T DTE RJ-45 Pin No Connecting the 10/100Base-T Ethernet Port to a PC DTEConnecting the POTS/ISDN Line 1058 10/100Base-T Port 10/100Base-T Hub RJ-45 Pin NoModel 1058DV RJ-45 POTS/ISDN interface Connecting PowerPower UP OperationFront Panel LED Status Monitors Description LEDDimensions LED Status IndicatorsPower Supply Temperature RangePatton Model # Description Appendix BPage POTS/ISDN Interface Appendix C10/100BASE-T Interface Vdsl Interface
Related manuals
Manual 28 pages 52.21 Kb Manual 5 pages 22.39 Kb