Patton electronic user manual Standalone Unit Installation, 1058DV, Rack Card Installation

Page 8

3.0 INSTALLATION

Because the Model 1058 requires no configuration, it can be installed quickly. If you are installing a standalone unit, refer to section 3.1 “Standal- one unit installation”. Otherwise, refer to section 3.2 “Rack card installation”.

3.1 STANDALONE UNIT INSTALLATION

Do the following:

1.Connect the line interface between the units (refer to section 3.3, “Connecting the Twisted-Pair Line Interface” on page 10)

Note See Figure 2 for the standalone unit’s rear panel arrangements.

2.Connect the Ethernet interface (refer to section 3.4, “Connecting the 10/100Base-T Ethernet Interface” on page 11).

3.Connect the power plug (refer to section 3.6, “Connecting Power” on page 13).

1058DV

1058D

USA

in

the

 

Made

 

Power

VLINK

Ethernet

VDSL twisted-pair

POTS/ISDN Ethernet

USA

in

the

 

Made

 

Power

VLINK

Power

jack

Ethernet RJ-45 interface port

VDSL twisted-pair

terminal block

interface

POTS/ISDN twisted-pair terminal block interface

Figure 2. Model 1058 standalone rear panel

3.2 RACK CARD INSTALLATION

The Model 1058 rack card version comprises a front card and a rear card.Do the following to install the cards into the rack chassis:

1. Slide the rear card into the back of the chassis along the metal rails.

8

Image 8
Contents User Manual Warranty Information InstallationSpecifications General InformationCE Notice Warranty InformationRadio and TV Interference Page Industry Canada Notice Service Tel +1 301 Email support@patton.comDescription FeaturesGeneral Information Typical application Installation Standalone Unit InstallationRack Card Installation 1058DVVlink 1058DVRC 1058DRCConnecting the TWISTED-PAIR Line Interface Model 1058 RJ-45 twisted pair line interfaceConnecting the 10/100BASE-T Ethernet Interface Connecting the 10/100Base-T Ethernet Port to a HubConnecting the 10/100Base-T Ethernet Port to a PC DTE Connecting the POTS/ISDN Line1058 10/100Base-T Port 10/100Base-T Hub RJ-45 Pin No 1058 10/100Base-T Port 10/100Base-T DTE RJ-45 Pin NoConnecting Power Model 1058DV RJ-45 POTS/ISDN interfaceFront Panel LED Status Monitors Power UPOperation LED DescriptionLED Status Indicators Power SupplyTemperature Range DimensionsAppendix B Patton Model # DescriptionPage Appendix C 10/100BASE-T InterfaceVdsl Interface POTS/ISDN Interface
Related manuals
Manual 28 pages 52.21 Kb Manual 5 pages 22.39 Kb