3 • Configuring the RAS for operation | Model 3125 RAS Getting Started Guide |
|
|
16.Use the left arrow key to return to the top level management page.
17.Select a Home.
18.Select 1 StoreConfig to save your IP address and netmask.
The RAS is now prepared for configuration using a Web browser.
Note The default gateway has not been configured at this time. You can access the web pages with a PC located on the same network as the RAS or you must configure the default gateway using HyperTermi- nal. Select i IP then 2 Default Gateway.
Configuring the RAS with a Web browser
This section describes configuring the following:
•User authentication
•
•Default gateway
Opening the RAS Web Administration Pages
Do the following:
1.Connect the RAS to the LAN.
2.Start a Web browser session and go to the URL: http://<the.ras.ip.address>
where the <the.ras.ip.address> is the IP address of the RAS entered in Step 8.
3.When the username and password window displays, type superuser as the username and password, then press <RETURN>. The Administration Pages Home window appears (see figure 22).
40 | Configuring the RAS with a Web browser |