
OnSite 2800 Series User Manual | 4 • Serial port configuration |
|
|
Enabling a Frame Relay PVC
After binding Framerelay PVC to an ip interface it must be enabled for packet processing. This procedure acti- vates the PVC by opening the bound ip interface.
This procedure describes how to enable Framerelay PVC for packet processing
Mode: PVC
Step | Command | Purpose |
|
|
|
1 | node(pvc)[dlci]#no shutdown | Enables the Frame Relay PVC |
|
|
|
Example: Disabling a Frame Relay PVC
The following example enables Frame Relay PVC with the DLCI 1 on the serial interface on slot 0 and port 0.
2800(cfg)#port serial 0 0
Check the PVC 1 status using show
2800(pvc)[1]#show |
|
Running configuration: |
|
# | |
# | # |
… |
|
pvc 1 |
|
encapsulation rfc1490 |
|
bind interface wan router |
|
no shutdown |
|
Disabling a Frame Relay PVC
Frame Relay PVCs can be disabled whenever it is necessary. Be aware that disabling a specific PVC also dis- ables the related serial interface and vice versa.
This procedure describes how to disable the Frame Relay PVC DLCI on the serial interface.
Mode: PVC
Step | Command | Purpose |
|
|
|
1 | node(pvc)[dlci]#shutdown | Disables the Frame Relay PVC DLCI. |
|
|
|
Example: Disabling a Frame Relay PVC
The following example disables Frame Relay PVC 1 on the serial interface on slot 0 and port 0 of an OnSite router.
2800(cfg)#port serial 0 0
Serial port configuration task list | 52 |