Patton electronic user manual SmartNode 4630 rear panel, SN4638

SmartNode 4630 User Manual 1 • General information

SmartNode 4630 rear panel

The SmartNode 4630 is a compact VoIP Gateway Router that supports eight VoIP calls on five ISDN BRI ports (see figure 2). The SmartNode 4630 rear panel ports are described in table 2.

Power

(~120–240V, 50/60 Hz, 1A)

CONSOLE

RS-232 port

Life-line

ports

SN4638

ISDN S/T
BRI ports 0/0 – 0/4	SN4634

ETH 0/1

10/100bT portISDN S/T

BRI ports 0/0 – 0/2

	RESET	ETH 0/0
	button	10/100bT port
		Figure 2. SN4630 rear panel
		Table 2. Rear panel ports
Port		Description
WAN ETH 0/0	Auto-MDX Fast-Ethernet port, RJ-45 (see figure 2), connects the unit to an Ethernet
	WAN device (for example, a cable modem, DSL modem, or fiber modem).
LAN ETH 0/1	Auto-MDX Fast-Ethernet port, RJ-45 (see figure 2), connect the unit to an Ethernet
	LAN (for example, a PC, printer, or wireless bridge).
BRI 0/0	ISDN BRI TE/NT port, RJ-45 socket S0 (S/T) interface (see figure 2), connects the
	SmartNode with an ISDN device over an S/T bus, e.g. a PBX or an NT. The inter-
	face may be used as fallback if connected to an NT. The port can be switched
	between TE and NT mode.The interface is internally terminated with 100 Ohm.
	Point-to-point or point-to-multipoint configurable. If the port is in NT mode a phantom
	power supply can be switched on to supply connected phones with power.

SmartNode 4630 overview 15