Targus Wireless Laser Rechargeable Notebook Mouse
3Insert the supplied batteries, making sure that the positive (+) and negative
WARNING: WHEN REPLACING THE BATTERIES, USE ONLY
AVOID MIXING NEW AND USED BATTERIES IN A DEVICE.
4 Slide the battery cover back into position until it “clicks” firmly into place.
5Turn on the mouse by sliding the on/off switch on the bottom of the mouse to the “on” position.
NOTE: WHILE THE MOUSE IS FUNCTIONING, NO LASER LIGHT IS VISIBLE TO THE NAKED EYE. BE CAREFUL NOT TO LOOK DIRECTLY INTO THE EMITTER HOLE WHILE THE MOUSE IS ACTIVE.
Charging the Batteries
For best results, you should charge the mouse at least 4 hours before using it. You can do this via the supplied USB charge cable. To do this:
1Connect the cable’s USB connector into an available USB port on your computer.
2Connect the other end to the mouse.
NOTE: TO CONTINUOUSLY CHARGE THE MOUSE VIA THE USB CHARGE CABLE, YOUR COMPUTER MUST BE ON AND AWAKE. FOR BEST RESULTS, TURN OFF YOUR COMPUTER’S POWER MANAGEMENT FEATURE WHILE CHARGING THE MOUSE.
7