TP-Link TL-WN727N Hardware Overview, 150Mbps Wireless N USB Adapter, Working Status,  Note

Page 10

TL-WN727N

150Mbps Wireless N USB Adapter

1.3Hardware Overview

LED status:

	Status	Working Status

	Off	The driver has not been installed;
	Off	The adapter's radio has been disabled.
		The adapter's radio has been disabled.

	Flashing Slowly	The driver has been installed but no data is being transmitted or
	Flashing Slowly	received.
		received.

	Flashing Quickly	Data is being transmitted or received.

Note:

When the card failed to connect to a wireless network, the LED may be off. Please choose your network and try to connect again.

3

Image 10

Contents TL-WN727N 150Mbps Wireless N USB Adapter Rev 3.2.0COPYRIGHT & TRADEMARKS FCC STATEMENT FCC RF Radiation Exposure StatementIndustry Canada Statement CE Mark WarningCanadian Compliance Statement Korea Warning StatementsSafety Information The product carries the CE Mark DECLARATION OF CONFORMITYProduct Description 150Mbps Wireless N USB Adapter Shennan Rd, Nanshan, Shenzhen, ChinaTo connect using Windows built-in wireless utility CONTENTSTo connect using WPS Hardware OverviewTL-WN727N Package Contents150Mbps Wireless N USB Adapter  NoteChapter 1 Product Overview 1.2 Features1.1 Introduction Working Status 1.3 Hardware OverviewStatus  Note2.1 Hardware Installation Chapter 2 Installation2.2 Software Installation 150Mbps Wireless N USB Adapter 5. Click Install to continue the setup 6. The utility and drivers will install. This may take 1~2 minutes 150Mbps Wireless N USB Adapter To connect using TWCU TP-LINK Wireless Configuration Utility Chapter 3 Connect to a Wireless Network3.1 To connect using TWCU To connect using WPS1 Wireless network of WPA/WPA2-Personal 2 Wireless network of WPA/WPA2-Enterprise 4. Please wait a few minutes for the connection process 3.2 To connect using WPS 3.2.1 PBC Push Button Configuration method150Mbps Wireless N USB Adapter 3.2.2 PIN method 3.2.2.1. Enter the PIN from your AP device2. The adapter will be connecting to the target network 3.2.2.2. Enter a PIN into your AP device3.3 To connect using Windows built-in wireless utility 3.3.1 In Windows3. You have now successfully connected to the network 3.3.2 In Windows Vista 4. You have now successfully connected to the network 3.3.3 In Windows XP 2. Right-click on the wireless computer icon in your system tray lower-right corner. Select View Available Wireless Networks 3.3.4 In Windows 2. If the network is unencrypted, you will directly connect to it TL-WN727N Chapter 4 Management 4.1 ProfileThe following items can be found on the screen 4.1.2 Modify a profile 4.2 Advanced 4.1.3 Delete a profile4.3 About Chapter 5 AP Mode  SoftAP mode Select to enable or disable the function Chapter 6 Uninstall Software 6.1 In Windows XP/Vista/76.1.2 Uninstall the driver software from your PC 6.2 In Windows 6.2.1 Uninstall the utility software from your PC6.2.2 Uninstall the driver software from your PC 4. Click Finish when the figure below appears150Mbps Wireless N USB Adapter TL-WN727N150Mbps Wireless N USB Adapter Normal Appendix A SpecificationsEnvironmental and Physical Appendix B Glossary  Spread Spectrum - Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable, secure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum DSSS and Frequency Hopping Spread Spectrum FHSS