TP-Link TL-WN727N manual 150Mbps Wireless N USB Adapter, Enter a PIN into your AP device

Page 23

2.The adapter will be connecting to the target network.

TL-WN727N

150Mbps Wireless N USB Adapter

2.The adapter will be connecting to the target network.

Figure 3-14

3.When Figure 3-12appears, you have successfully connected to the network.

3.2.2.2. Enter a PIN into your AP device

1.Open TWCU and click WPS tab. Select Enter the PIN of this device into my access point or wireless router. In the field beside PIN, you will see the PIN value of the adapter which is randomly generated. Click Connect to continue.

Figure 3-15

2.Open your router’s Web-based Utility and click WPS link on the left of the main menu. Then click Add device and the following figure will appear. Enter the PIN value of the adapter in the empty field beside PIN and then click Connect.

16

Image 23

Contents Rev 3.2.0 TL-WN727N 150Mbps Wireless N USB AdapterCOPYRIGHT & TRADEMARKS FCC RF Radiation Exposure Statement FCC STATEMENTKorea Warning Statements CE Mark WarningCanadian Compliance Statement Industry Canada StatementSafety Information Shennan Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITYProduct Description 150Mbps Wireless N USB Adapter The product carries the CE MarkHardware Overview CONTENTSTo connect using WPS To connect using Windows built-in wireless utility Note Package Contents150Mbps Wireless N USB Adapter TL-WN727N1.1 Introduction 1.2 FeaturesChapter 1 Product Overview  Note 1.3 Hardware OverviewStatus Working Status2.2 Software Installation Chapter 2 Installation2.1 Hardware Installation TL-WN727N 5. Click Install to continue the setup 6. The utility and drivers will install. This may take 1~2 minutes TL-WN727N To connect using WPS Chapter 3 Connect to a Wireless Network3.1 To connect using TWCU To connect using TWCU TP-LINK Wireless Configuration Utility1 Wireless network of WPA/WPA2-Personal 2 Wireless network of WPA/WPA2-Enterprise 4. Please wait a few minutes for the connection process 3.2.1 PBC Push Button Configuration method 3.2 To connect using WPSTL-WN727N 3.2.2.1. Enter the PIN from your AP device 3.2.2 PIN method3.2.2.2. Enter a PIN into your AP device 2. The adapter will be connecting to the target network3.3.1 In Windows 3.3 To connect using Windows built-in wireless utility3. You have now successfully connected to the network 3.3.2 In Windows Vista 4. You have now successfully connected to the network 3.3.3 In Windows XP 2. Right-click on the wireless computer icon in your system tray lower-right corner. Select View Available Wireless Networks 3.3.4 In Windows 2. If the network is unencrypted, you will directly connect to it  Note 4.1 Profile Chapter 4 ManagementThe following items can be found on the screen 4.1.2 Modify a profile 4.1.3 Delete a profile 4.2 Advanced4.3 About Chapter 5 AP Mode  SoftAP mode Select to enable or disable the function 6.1 In Windows XP/Vista/7 Chapter 6 Uninstall Software6.1.2 Uninstall the driver software from your PC 6.2.1 Uninstall the utility software from your PC 6.2 In Windows4. Click Finish when the figure below appears 6.2.2 Uninstall the driver software from your PCTL-WN727N 150Mbps Wireless N USB AdapterTL-WN727N Environmental and Physical Appendix A SpecificationsNormal Appendix B Glossary  Spread Spectrum - Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable, secure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum DSSS and Frequency Hopping Spread Spectrum FHSS