TP-Link manual To add a new entry, please follow the steps below, TL-WR940N Wireless N Router

Page 69

To add a new entry, please follow the steps below.

TL-WR940NWireless N Router

Figure 4-41 Parental Control Settings

¾Parental Control - Check Enable if you want this function to take effect, otherwise check Disable.

¾MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC, or you can make use of the Copy To Above button below.

¾MAC Address of Your PC - This field displays the MAC address of the PC that is managing this Router. If the MAC Address of your adapter is registered, you can click the Copy To Above button to fill this address to the MAC Address of Parental PC field above.

¾Website Description - Description of the allowed website for the PC controlled.

¾Schedule - The time period allowed for the PC controlled to access the Internet. For detailed information, please go to “Access Control → Schedule”.

¾Modify - Here you can edit or delete an existing entry.

To add a new entry, please follow the steps below.

1.Click the Add New… button and the next screen will pop-up as shown in Figure 4-42.

2.Enter the MAC address of the PC (e.g. 00-11-22-33-44-AA) you’d like to control in the MAC Address of Child PC field. Or you can choose the MAC address from the All Address in Current LAN drop-down list.

3.Give a description (e.g. Allow Google) for the website allowed to be accessed in the Website Description field.

4.Enter the allowed domain name of the website, either the full name or the keywords (e.g. TP-LINK) in the Allowed Domain Name field. Any domain name with keywords in it (http://www.tp-link.com)will be allowed.

5.Select from the Effective Time drop-down list the schedule (e.g. Schedule_1) you want the entry to take effect. If there are not suitable schedules for you, click the Schedule in red below to go to the Advance Schedule Settings page and create the schedule you need.

-61-

Image 69

Contents Rev 1.1.0 TL-WR940N Wireless N RouterFCC STATEMENT COPYRIGHT & TRADEMARKSCE Mark Warning FCC RF Radiation Exposure StatementNational restrictions CountryIndustry Canada Statement Korea Warning StatementsNCC Notice ETSI EN 300 328 V1.7.1 DECLARATION OF CONFORMITYETSI EN 301 489-1 V1.8.12008& ETSI EN 301 489-17 EN 550222006 +A12007 EN 550241998+A12001+A22003 EN 61000-3-22006+A12009+A22009 ENCONTENTS Package ContentsChapter 4.6.5 4.15.1 TL-WR940N Wireless N Router Package ContentsSimple Installation Flexible Access ControlChapter 1.Introduction 1.1 Overview of the Router1.3 Main Features 1.4 Panel Layout1.4.1 The Front Panel 1.4.2 The Rear Panel Wireless N RouterTL-WR940N Indication¾ RESET 2.2 Installation Environment Requirements Chapter 2.Connecting the Router2.3 Connecting the Router 2.1 System RequirementsFigure 2-1 Hardware Installation of the TL-WR940N Wireless N Router 3.1 TCP/IP Configuration Chapter 3.Quick Installation GuideFigure 3-1 Success result of Ping command Please check the connection following these stepsFigure 3-2 Failure result of Ping command 1. Is the connection between your PC and the Router correct?3.2 Quick Installation Guide Figure 3-6 Choose WAN Connection Type Figure 3-5 Quick SetupFigure 3-8 Quick Setup - MAC Clone Figure 3-7 Quick Setup - PPPoEFigure 3-10 Quick Setup - Static IP Figure 3-9 Quick Setup - MAC CloneNote Dialog z PSK Password - You can enter ASCII or Hexadecimal characters Figure 3-13 Quick Setup - Finish Chapter 4.Configuring the Router 4.1 Login4.2 Status 4.4 QSS 4.3 Quick SetupPlease refer to 3.2 Quick Installation Guide Figure 4-1 Router StatusMethod One I. By PBCMethod Two The QSS Configuration Screen of Wireless Adapter Method ThreeTL-WR940N Wireless N Router II. By PIN Method Two Enter the PIN from my Router 4.5 Network 4.5.1 WANadded to the network Figure 4-5 WAN - Dynamic IP Figure 4-6 WAN - Static IP Figure 4-7 WAN - PPPoE Figure 4-8 PPPoE Advanced Settings NSW / ACT - nsw.bigpond.net.au QLD - qld.bigpond.net.au Figure 4-10 L2TP Settings Figure 4-11 PPTP Settings z Static IP - Connections which use static IP address assignment z Dynamic IP - Connections which use dynamic IP address assignment4.5.3 MAC Clone 4.5.2 LANFigure 4-12 LAN Figure 4-13 MAC Address Clone4.6 Wireless 4.6.1 Wireless SettingsOnly the PC on your LAN can use the MAC Address Clone function Figure 4-15 Wireless Settings ¾ Mode - Select the desired mode. The default setting is 11bgn mixed 4.6.2 Wireless Security ¾ WPA /WPA2 - Enterprise - It’s based on Radius Server Encryption - You can select either Automatic, or TKIP or AES Figure 4-20 Wireless MAC address Filtering 4.6.3 Wireless MAC Filtering4. Click the Save button to save this entry to access for Filtering Rules 4.6.4 Wireless Advanced4.6.5 Wireless Statistics 4.7.1 DHCP Settings 4.7 DHCPThis page will be refreshed automatically every 5 seconds ¾ Default Domain - Optional. Input the domain name of your network 4.7.3 Address Reservation 4.7.2 DHCP Clients List4.8 Forwarding To Reserve IP addressesTo modify or delete an existing entry 4.8.1 Virtual Servers To set up a virtual server entryFigure 4-31 Add or Modify a Virtual Server Entry 4.8.2 Port TriggeringTo add a new rule, follow the steps below 3. Incoming Port Range cannot overlap each other 4.8.3 DMZTo assign a computer or server to be a DMZ server 4.8.4 UPnP4.9.1 Basic Security 4.9 Securityz z z Figure 4-37 Basic Security4.9.2 Advanced Security 4.9.3 Local Management Figure 4-39 Local Management 4.9.4 Remote ManagementFigure 4-40 Remote Management 4.10Parental ControlTo add a new entry, please follow the steps below 7. Click the Save button 4.11.1 Rule 4.11Access ControlFigure 4-45 Access Control Rule Management To add a new rule, please follow the steps belowFigure 4-46 Add or Modify Internet Access Control Entry Figure 4-47 Host Settings 4.11.2 HostFigure 4-49 Add or Modify a Host Entry Figure 4-48 Add or Modify a Host EntryFigure 4-50 Target Settings 4.11.3 TargetFigure 4-52 Add or Modify an Access Target Entry Figure 4-51 Add or Modify an Access Target EntryTo add a new schedule, follow the steps below 4.11.4 Schedule4.12 Advanced Routing Figure 4-54 Advanced Schedule SettingsFigure 4-55 Advanced Routing Other configurations for the entries 4.12.1 Static Routing ListTo add static routing entries 4.12.2 System Routing Table 4.13Bandwidth Control4.13.2 Rules List 4.13.1 Control Settings4.14IP & MAC Binding Setting 4.14.1 Binding SettingTo add/modify a Bandwidth Control rule, follow the steps below To modify or delete an existing entry, follow the steps below To add IP & MAC Binding entries, follow the steps belowTo find an existing entry, follow the steps below Figure 4-64 Binding Setting4.14.2 ARP List Figure 4-66 Find IP & MAC Binding EntryFigure 4-67 ARP List 4.15.1 Comexe.cn DDNS 4.15Dynamic DNS4.15.2 Dyndns.org DDNS To set up for DDNS, follow these instructionsFigure 4-69 Dyndns.org DDNS Settings 4.15.3 No-ip.com DDNS4.16System Tools Figure 4-70 No-ip.com DDNS SettingsFigure 4-71 The System Tools menu To set time manually 4.16.1 Time SettingsTo set time automatically 4.16.2 DiagnosticTo set Daylight Saving 2. The time will be lost if the router is turned offFigure 4-73 Diagnostic Tools To upgrade the Routers firmware, follow these instructions below 4.16.3 Firmware Upgrade4.16.4 Factory Defaults 4.16.5 Backup & Restore4. The Router will reboot after the upgrading has been finished 4.16.6 Reboot 4.16.8 System Log 4.16.7 PasswordFigure 4-80 System Log Figure 4-81 Mail Account Settings Figure 4-82 Statistics 4.16.9 StatisticsStatistics Table 1. How do I configure the Router to access Internet by ADSL users? Appendix A FAQ3. I want to use Netmeeting, what do I need to do? Figure A-3 MAC CloneFigure A-4 Virtual Servers Figure A-6 DMZ Figure A-5 Add or Modify a Virtual server Entry4. I want to build a WEB Server on the LAN, what should I do? field of the Web browser 5. The wireless stations cannot connect to the Router1. Install TCP/IP component Appendix B Configuring the PCsNow you have two ways to configure the TCP/IP protocol below ¾ Setting IP address automaticallyshown in the Figure below Figure B-2Figure B-3 ¾ Setting IP address manuallyFigure B-4 Wireless Appendix C SpecificationsGeneral Environmental and PhysicalAppendix D Glossary identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name