TP-Link manual 4.14IP & MAC Binding Setting, TL-WR940N Wireless N Router

TL-WR940NWireless N Router

¾Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0.

¾Ingress bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0.

¾Enable - This displays the status of the rule.

¾Modify - Click Modify to edit the rule. Click Delete to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.

Step 1: Click Add New… shown in Figure 4-61,you will see a new screen shown in Figure 4-62.

Step 2: Enter the information like the screen shown below.

Figure 4-62 Bandwidth Control Rule Settings

Step 3: Click the Save button.

4.14IP & MAC Binding Setting

Figure 4-63 the IP & MAC Binding menu

There are two submenus under the IP &MAC Binding menu (shown in Figure 4-63):Binding Setting and ARP List. Click any of them, and you will be able to scan or configure the corresponding function. The detailed explanations for each submenu are provided below.

4.14.1 Binding Setting

This page displays the IP & MAC Binding Setting table; you can operate it in accord with your desire. (shown in Figure 4-64).

-75-